Wash/Dry Program Status And Power Cuts; Power Cuts - Beko BWD 6421 Installation & Operating Instructions And Washing Guidance

Wash/dry program status and

power cuts

Programme Phases
Once started, current programme status
and time remaining till completion can
be ascertained from the screen.
The active phases will appear
successively at the top of the display
as the programme progresses. The
time remaining until the end of the
programme will also appear on the
display. It updates at regular intervals,
but not minute by minute.
Any option button can be selected
provided the wash phase in which it
takes effect has not been passed and
when the programme accepts the
option.
Pressing the start/stop button during the
wash activates the PAUSE function.
C
If the programme is changed on the
selector dial during the washing and
drying process, the washer-dryer
will go onto PAUSE status and the
programme will be cancelled.
C
If you need to add or remove a
garment, press the start/stop button
and make sure that the water level
is not above the door overflow level
and that the temperature inside is
not high. Press the start/stop button
again to restart the wash from the
same cycle phase it had stopped at.
Power Cuts
If there is a power cut, the washing
machine will continue to operate from
the point at which it stopped when
power is reconnected (its memory lasts
for a few hours).
Warnings:
A
Level the washing machine by
adjusting the feet to reduce the
noise caused by spin-drying.
A
Try and wash clothes of different
sizes in the same wash programme
to favour the distribution of the
clothes inside the drum during spin-
drying.
A
All the models have a safety system
for spin-drying that prevents spin-
drying from being carried out if the
distribution of the clothes inside
the drum is too concentrated.
This prevents the appliance from
vibrating too much.
If you find that the clothes are not
properly wrung out, try spin-drying
them again after having distributed
the clothes more evenly in the drum.
17
EN