Advertisement
Quick Links
ARRAS TRAP
A
ssembly
Find out more at schachtspindle.com
Schacht Spindle Company
6101 Ben Place Boulder, CO 80301
p. 303.442.3212
© 2023 Schacht Spindle Company, Inc.
ARRAS TRAP
SL2228
Assembly
TM
PARTS
2X
trap sides
2X
dowels
1X
trap cloth
2X
3/4" nylon spacers
2X
#8 x 1-1/4" Phillips truss head sheet metal
screws
4X
#6 x 3/4" Phillips pan head sheet metal
screws
2X
knobs with 1-1/4" shafts
2X
T-nut slides
TOOLS REQUIRED
#2 Phillips screwdriver
T-nut slide
black nut for knob
hole for support
11.23
TM
Phillips truss head sheet
metal screw
Phillips pan head
sheet metal screw
nylon spacer
trap side, inner face
holes for dowels
trap side, outer face
ASSEMBLE THE TRAP
Orient the trap sides as shown in Figure 1: the inner
1.
face of each trap side has two large holes at the front for
the dowels and a black nut at the back for the knob. In
the remaining hole, you will attach a nylon spacer as trap
support on the outer face of the side. Insert a #8 x 1-1/4"
Phillips truss head sheet metal screw through a 3/4"
nylon spacer, then attach to a trap side. Repeat with the
remaining trap side.
FIGURE 1: ATTACH TRAP SUPPORTS
nylon spacer
#8 x 1-1/4" Phillips truss
head sheet metal screw
Advertisement
Related Manuals for Schacht ARRAS TRAP SL2228
Summary of Contents for Schacht ARRAS TRAP SL2228
- Page 1 Find out more at schachtspindle.com Schacht Spindle Company 6101 Ben Place Boulder, CO 80301 hole for support p. 303.442.3212 © 2023 Schacht Spindle Company, Inc. 11.23...
- Page 2 Insert dowels through the sleeves of the trap INSTALL THE TRAP cloth (Figure 2). Insert a knob with a 1-1/4" shaft through a T-nut slide as shown in Figure 4. Repeat with the Lay out the parts on a work surface as shown other knob and T-nut slide.
Need help?
Do you have a question about the ARRAS TRAP SL2228 and is the answer not in the manual?
Questions and answers