Merck easypod How-To page 3

NOTE: Do not remove your easypod
the power cable while data is being transferred. If this happens
you should close the lid and restart the procedure.
The transfer of information will start automatically.
The left status light will flash green quickly (4 flashes per
second) to indicate that information is being transferred.
When the data transfer is successfully completed (after
approximately 1 minute), the left status light will stop flashing
and both lights will turn green.
'Data transfer completed' will appear on the easypod
Press the 'OK' button.
from the transmitter or disconnect
®
screen.
®
UK&IE/SAI/0000/0000 | May 2022