Electro Industries EB-ZE 8 Series Installation & Operating Instructions Manual

Zone controller hydronic system interface ts series boiler compatible

Advertisement

Quick Links

Electro Industries'
Hydronic System Interface
TS Series Boiler Compatible
Installation & Operating Instructions
This model is designed and equipped to handle various combinations of zone pumps, various zone valve
types, actuators, etc. The one control board has wiring arrangements for all zone operating devices.
A major feature is built-in automatic stage shedding based upon the capacity of each active zone. This
compensates for any mixture of large and small zones.
Note: Capacity and SIZE dial switches must be set during installation.
Convenience of an attractive wiring center, all connections at easily accessed terminal blocks, LED's, and
simplified zone system installation are also basic to this model.
Special automatic or built-in shift to higher water temperature for priority zone 1. In many combination
temperature installations this feature eliminates mixing valve or injection pump temperature control.
Features
Dual Control Temperature, Priority Zone
Garage Priority Zone Option
Digital or Standard Thermostat Compatible
Compatible with Zone Pumps, Zone Valves (4, 3, 2 Wire Devices), Actuators, Etc.
Fuse Protected, Control Board and Zone Pump Connections
Nineteen Onboard Lights, Each Stat and Zone Output, Diagnostic and Basic Power
Includes Its Own Enclosure
One 120V Hookup Allows For Simple Installation
Remote Data Communication to Boiler Control Board
Drawings: BH031, BH032, XX017
DO NOT DESTROY THIS MANUAL. PLEASE READ CAREFULLY AND KEEP IN A SAFE
PLACE FOR FUTURE REFERENCE BY A SERVICE TECHNICIAN.
05/08/2012
Zone Controller
Models: EB-ZE*8 and EB-ZT*8
BI013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EB-ZE 8 Series and is the answer not in the manual?

Questions and answers

Table of Contents