Pittsburgh 70262 Owner's Manual & Safety Instructions

Low lift transmission jack

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
450 LB LOW LIFT TRANSMISSION JACK
Note: This tool requires a 1/2" drive ratchet or breaker bar to operate
(neither one included). Do not use an impact tool to operate jack.
Item
Weight Capacity
Maximum Height
Minimum Height
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
70262
450 lb.
23-1/4"
7-1/4"
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
24a

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 70262 and is the answer not in the manual?

Questions and answers

Summary of Contents for Pittsburgh 70262

  • Page 1 450 LB LOW LIFT TRANSMISSION JACK Note: This tool requires a 1/2″ drive ratchet or breaker bar to operate (neither one included). Do not use an impact tool to operate jack. Item 70262 Weight Capacity 450 lb. Maximum Height 23-1/4″...
  • Page 2: Specifications

    Wheels may scratch or dig 11. Keep clear of load while lifting and lowering. into less durable surfaces (such as linoleum or wood). 12. Lower load slowly. SAVE THESE INSTRUCTIONS. Page 2 For technical questions, please call 1-888-866-5797. 70262...
  • Page 3 2. Insert a Caster in each opening in Base Assembly (13). Place a Washer (15) and Nut (14) over the threaded Caster Assembly (16) end of each Caster Assembly. Tighten securely. See Figure A. Figure A: Caster Assembly 70262 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Functions Ratchet Tie-down (7) Strap Ratchet Handle Saddle (3) Wing Nut (5) Screw Rod (25) Page 4 For technical questions, please call 1-888-866-5797. 70262...
  • Page 5: Operation

    The Handle should rest on the raised portion of the flanges. See Figure D. Flange Release Tab A Release Tab B Figure B: Ratchet Tie-down Use Figure C: Releasing the Strap 70262 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6: Maintenance

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175495082 when ordering parts. Page 6 For technical questions, please call 1-888-866-5797. 70262...
  • Page 7: Description Qty

    Caster Assembly Nut M8 Ratchet Tie-down Bolt M10 x 50 Set Screw M8 x 20 Nut M8 Bolt M6 x 12 Bushing Bolt M10 x 45 Spring Washer Bearing Adjustable Frame Socket 70262 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8: Limited 90-Day Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents