Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19h
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pittsburgh 56374
Summary of Contents for Pittsburgh 56374
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Specifications
It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Page 2 For technical questions, please call 1-888-866-5797. Item 56374... - Page 3 Post from coming out of the Base. Handle Base WARNING! Before using the Jack Stands, make sure the Post cannot be pulled up and out of the Base. Repeat with other Jack Stand. Item 56374 For technical questions, please call 1-888-866-5797. Page 3...
-
Page 4: Operation
Determine if the vehicle is stable. or other damage/deformation If not, raise the vehicle and appears. Discard Jack Stand reposition the Jack Stands. if damaged or deformed. Remove floor jack. Page 4 For technical questions, please call 1-888-866-5797. Item 56374... - Page 5 Posts. WARNING! Do not use Jack Stands as a permanent stand for the vehicle. Use them only while making repairs, then immediately lower vehicle to the ground. Item 56374 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Check for broken, cracked, or bent parts, loose or missing parts, and any condition that may affect the proper operation of the product. Do not use damaged equipment. Discard Jack Stand if damaged or deformed. Page 6 For technical questions, please call 1-888-866-5797. Item 56374...
-
Page 7: Please Read The Following Carefully
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 56374 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 56374 and is the answer not in the manual?
Questions and answers