Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Item
Weight Capacity
Maximum Height
Minimum Height
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2022 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
56617
3 Tons (6,000 lb.)
19-7/8"
3-1/8"
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22i
Advertisement
Table of Contents
Related Manuals for Pittsburgh 56617
Summary of Contents for Pittsburgh 56617
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Item 56617 Weight Capacity 3 Tons (6,000 lb.) Maximum Height 19-7/8"...
-
Page 2: Table Of Contents
11. Do not adjust safety valve. Thoroughly test the Jack for proper operation. If it does not work properly, bleed air from its hydraulic system as stated on page 4. SaVE tHESE InStructIOnS. Page 2 For technical questions, please call 1-888-866-5797. Item 56617... -
Page 3: Safety
Fill plug) Saddle Lift arm Handle Front Handle Socket Wheel rear caster Safety Valve cover u-Joint DO nOt OpEn Or aDJuSt Fluid Fill plug Hydraulic unit Figure a: Item 56617 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Operation
4. Assemble the Fill Plug, close the Cover 3. Add high grade hydraulic fluid into the fill hole Plate, and reinstall the screws. slowly until the fluid reaches the top of the hole. Page 4 For technical questions, please call 1-888-866-5797. Item 56617... - Page 5 4. Lower the Jack completely. Then, store in a load high enough to clear the jack stands, safe, dry location out of reach of children. then carefully remove jack stands. Item 56617 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Maintenance
Jack may be low on fluid. Check the fluid level and refill if needed. Jack may require bleeding - see instructions on Bleeding on page 4. Unit may have too much hydraulic fluid inside, check fluid level and adjust if needed. Page 6 For technical questions, please call 1-888-866-5797. Item 56617... -
Page 7: Parts List And Assembly Diagram
Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175365736 when ordering parts. Item 56617 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Warranty
pLEaSE rEaD tHE FOLLOWInG carEFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Need help?
Do you have a question about the 56617 and is the answer not in the manual?
Questions and answers