Last Number Redial; To Mute The Mouthpiece; To Lock The Keypad; Earpiece Volume - Binatone DP411 User Manual

Color profile: Generic CMYK printer profile
Composite Default screen
Making and answering calls
Last Number To make a repeat call to any one of the last
Redial three numbers you dialled:
1 Press the
u The last number you dialled is shown on the
display.
2 If necessary, press the
Redial button again until the number you
want is shown on the display
3 Press the PHONE or SPEAKERPHONE button
to dial the number
To mute the To put a call on hold, so that the person on the
mouthpiece other end cannot hear you:
◗
Press the MUTE/DEL button once
While the mouthpiece is muted,
on the display.
To get back to the call:
◗
Press the MUTE/DEL button again
To lock the To lock the keypad so that no buttons can be
keypad pressed:
◗
Press the LOCK button and hold it for about
3 seconds until
To unlock the keypad:
◗
Press the LOCK button and hold it until
disappears from the display
10
E:\Binatone2003\S_2300\s2300_UK_draft02.vp
27 November 2003 19:50:00
Last Number Redial/P button
Last Number
is shown
appears on the display
Earpiece During a call, to adjust the volume in the
volume earpiece or speakerphone:
1 Press the VOLUME button
u The display shows the current volume level
(1 to 5 ) as a number of small circles
2 Press a numbered key (1 to 5) to select the
volume you want
The handset will stay at this volume level for
later calls until you change the volume again.
◗
To page the Press the HANDSET LOCATOR button on
handset from the base unit
the base unit u The handset rings with a special tone. The
handset number flashes on the display. If you
have more than one handset, they will all ring.
To stop the handset ringing:
◗
Press any button or numbered key
You'll need to do this on all ringing handsets. If
you don't press a button, the ringing will carry
on for 20 seconds.
Binatone Help Line: 01325 304 473
Making and answering calls
11