Doss SoundBox Plus User Manual page 3

You want to
Turn On/Off
Disconnect the device
Reconnect with last device
Play/Pause
Volume up
Volume down
Skip to the next track
Go to the previous track
Switch modes
Answer a call
Reject a call
End a call
Apply TWS
Restore factory se�ng
Enable/disable the ba�ery saver func�on
Enable/disable the prompt tone
Pair your speaker with your smart device
1. Place your speaker and the smart device no more than 1 meter away.
2. Press the power bu�on for a few seconds to turn the speaker on.
Upon powering on, a tone will be heard, the blue LED starts flashing.
3. Turn on Bluetooth on your device and choose SoundBox Plus in the
list.
4. If the pairing is successful, the LED will change to solid blue. If the
pairing fails a�er 60 seconds, please press and hold the play/hand-free
bu�on for 5 seconds and try again.
5. Long press the play/hand-free bu�on to disconnect the Bluetooth.
Note: if your device cannot discover the SoundBox Plus, please long
press the play/hand-free bu�on and then try again.
Have problems connec�ng via Bluetooth?
1. Make sure that your device is within 1 meter from the speaker.
2. Clear the Bluetooth pairing list on your device.
3. Reset your device.
4. Try the pairing steps above again.
5. Problem s�ll not resolved? Contact DOSS customer service at
support@dossav.com for assistance.
Pair your device with the speaker via audio in cable
1. When using the audio input mode, control audio playback via the
connected device.
2. When the auxiliary cable is plugged, the play mode will automa�cally
switch to AUX IN mode.
Play music via SD card mode
1. Card capacity: 32G or below. If your micro SD card is larger than 32G,
please format it to FAT32 or FAT.
2. Support files: MP3、WAV、WMA、APE、FLAC
3. Play order: music will play in the download/copy order
Answer or end a call using your speaker
1.Briefly tap the play/hand free bu�on to pick up.
2.Speak with a clear voice right into the built-in microphone located on the
front sec�on of the speaker.
3.Tap the play/hand free bu�on again to end the call.
Set true wireless stereo pairing
Start the first speaker
Turn on the speaker, press and hold the ADD bu�on for 2 seconds.
Start the second speaker
Turn on the second speaker, press and hold the ADD bu�on for 2 seconds.
Notes:
• Start the second speaker within 60 seconds, otherwise the stereo pairing
se�ng of the first speaker will be canceled.
• If the pairing succeeds, the volume control ring of the master speaker is
in solid blue, and the slave will flash blue every 5 seconds.
• The speaker will have stereo pairing automa�cally if they used to be
paired.
• Press and hold the Play/hand free bu�on for 3 seconds to cancel the
stereo pairing mode.
• Under wireless stereo pairing, you can only change the modes(
Bluetooth/ audio-in) on the master speaker.
Use your speaker with Echo Dot
You can connect the Dot with SoundBox Plus via a 3.5mm auxin cable or
Bluetooth. Please follow the steps below to set up via Bluetooth:
1. Download the Alexa app and follow the standard setup procedure to get
the dot connected to your home Wi-Fi network.
2. Set your speaker to Bluetooth mode. You can press the "Play/hand free"
bu�on for 5 seconds to keep it in pairing status.
3. Turn on the Alexa app, tap Menu, and then tap Se�ngs.
4. Tap the Echo Dot in your list of Alexa devices and tap Bluetooth.
5. The SoundBox Plus should appear in the list of Bluetooth devices. If it
does not, then press the "Play/hand free" bu�on for 5 seconds and try
again. Once listed, tap on the speaker to complete the pairing process.
6. To remove the device, return to Bluetooth > tap the name of the
speaker > tap "Forget device".
How to do
Press and hold the power bu�on
Press and hold the Play/hand free bu�on
Tap the Play/hand free bu�on
Tap the Play/hand free bu�on
Rotate your finger clockwise
Rotate your finger counterclockwise
Tap the next track bu�on
Tap the previous track bu�on
Tap the MODE bu�on
Tap the Play/ hand free bu�on
Press and hold the Play/ hand free bu�on for
3 seconds
Tap the Play/hand free bu�on
Press and hold the ADD bu�on for 2 seconds
Press and hold the ADD bu�on for 8 seconds
Press and hold the next track bu�on for 5
seconds
Press and hold the previous track bu�on for 5
seconds