Download Print this page

Aranet PRO Quick Start Manual

Sensor pairing

Hide thumbs Also See for PRO:

Download this manual

Sensor Pairing

Quick Start Guide

Need help?

Do you have a question about the PRO and is the answer not in the manual?

Page 1 Sensor Pairing Quick Start Guide...
Page 2 PRO / PRO Plus base station Sensors can be paired one-by-one or in batches. When pairing the sensor, it should be located within 20 meters of the Aranet PRO/PRO Plus base station. Once the sensor is paired, it communicates with a base station at a much greater distance.
Page 3 Step. 2 In the user interface of the base station go to the main menu and open Sensors menu. Step.3 Set the Measurement interval (10, 5, 2 or 1 min) and click “PAIR SENSOR” button to initiate pairing mode. This will initiate a "2 min timer" (refer to step 4 below).
Page 4 Step. 5 Once pairing is successful, you'll see Feel free to add more sensors in the your sensor in the list – appeared with same 2-minute interval or click 'Stop a green corner. pairing' if you're ﬁnished. Step.6 After successful pairing, close the sensor by screwing the sensor cover back.
Page 5 Step. 9 Click the save button to save changes. That's it! Sensors can also be paired through Aranet Cloud interface by using the Base station management feature in Settings. For more details see Aranet PRO Plus/PRO Plus LTE base station user guide.

Pro plus