Related Manuals for Aranet 4 HOME
Summary of Contents for Aranet 4 HOME
- Page 1 Aranet4 HOME, Aranet4 PRO USER MANUAL Monitors air quality at your home, school, office or any other indoor private or public spaces. ARANET — MAKING SENSORS WIRELESS...
- Page 2 Additionally up to 100 Aranet4 PRO devices can be connected to the Aranet PRO base station. Refer to the chapter Using Aranet4 device with the Aranet PRO base station.
- Page 3 Symbol “A” wirelessly connected to Green Aranet PRO base represents normal CO ² displayed when station & Aranet Cloud) level (below 1000 ppm) calibration is set to automatic. No letter is displayed when Yellow represents average CO ² calibration is set to level (1000 to 1400 ppm) manual mode.
- Page 4 The inverted screen Do not remove batteries The battery is exhausted. alerts when CO ² during firmware upgrade. Replace the batteries. concentration is too high and unhealthy. The calibration Pin code representation, Frost can damage progress. when pairing device the sensor. The with smartphone trough recommended Aranet4 app via...
-
Page 5: Auto / Manual
– switch AUTO °C the CO ² calibration mode to Enable/disable device either manual (default connectivity to Aranet radio position) or automatic mode. (available only for the PRO version of the product.). Use MANUAL calibration Refer to chapter Using mode in case you are not Aranet4 device with the certain which mode to use. - Page 6 That's the easiest way to show the current air quality readings on larger screens in restaurants, cafes, bars, supermarkets, gyms or any other public spaces so that people can be aware that the facilities are safe from airborne COVID-19 risks. More answers about Aranet4 app in aranet4.com/displayapp forum.aranet.com...
- Page 7 The Aranet PRO base station serves as a device for collecting, storing and maintaining data from all types of Aranet sensors, including Aranet4 PRO. Up to 100 sensors can be connected to a single Aranet PRO base station which has a capacity to store the measurement history up to 10 years.
-
Page 8: Fcc Compliance Statement
FCC Compliance statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the 4 HOME and is the answer not in the manual?
Questions and answers