Aranet PRO Quick Start Manual
  1. Manuals
  2. Brands
  3. Aranet Manuals
  4. Security System
  5. PRO
  6. Quick start manual

Aranet PRO Quick Start Manual

Hide thumbs Also See for PRO:

Advertisement

Table of Contents

Aranet PRO
Quick Start
Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aranet PRO

Summary of Contents for Aranet PRO

  • Page 1 Aranet PRO Quick Start Guide...
  • Page 2 Aranet System Quick Start Guide...

  • Page 3: Table Of Contents

    Create Aranet Cloud account ..............6. Connect Base station to the Cloud ............6. Access Cloud data outside Aranet ecosystem ......... 7. To successfully set-up the Aranet ecosystem all steps has to be followed in order provided in table of content.

  • Page 4: Connect Base Station To The Internet

    Connect Base station to the internet Unpack and plug the Base station in using POE injector or PoE enabled network switch. PRO Plus base station Made in Latvia, EU www.aranet.com M/N: TDSBOA03 S/N: 371010004641 WiFi SSID: Aranet-C20a47 WiFi IP: 192.168.206.100 ETH IP: 192.168.205.100...

  • Page 5: Pairing A Sensor

    Pairing a sensor ! Important – The pairing of a sensor to a Base station is done with IMPORTANT lower transmit power – you must keep them 20 m apart at most. The pairing procedure is as follows: 1. Open the sensor cover and remove the battery if it has been already inserted.
  • Page 6 Choose the measurement interval, then click PAIR SENSOR 3. The 2 min timer indicates the 4. Successful pairing is confirmed by window to insert the battery in the one short and one long LED light flash sensor. Correct battery type for and takes up to 30 seconds.

  • Page 7: Create Aranet Cloud Account

    4. Copy the registration code for the next step. Connect Base station to the Cloud 1. Connect to the Base station via browser and WiFi SSID address. 2. Go to Aranet Cloud menu in the Base station side panel.

  • Page 8: Access Cloud Data Outside Aranet Ecosystem

    Using a Cloud API, the sensor and Cloud data can be integrated with any other web or cloud-based IT system, or 3rd party applications. To create API key: 1. Login the admin Aranet Cloud under account that has permission to edit Integrations.
  • Page 9 4. Click on the new key to see its details – it is now ready to be used or further edited if needed. API key can be used in Aranet partners’ software solution to take full advantage of the wireless sensing ecosystem.

Table of Contents