Summary of Contents for Air Science EvidenceBENCH EVB-72
Page 1
EVIDENCE-BENCH-SERIES.V4.2024 Specifications are subject to change without notice or C E R T I F I E D obligation on the part of Air Science. For questions I S O 9 00 1: 2 01 5 contact Air Science. I S O 1 40 01 : 20 15...
The disposal and/or emission of substances used in connection with this cabinet may be governed by var- ious local regulations. Familiarization and compliance with any such regulation are the sole responsibility of the users of the cabinet. The liablity of Air Science ®...
Register your new Air Science product online by visiting: www.airscience.com/warranty-registration. Customer Satisfaction Survey Air Science values your business, so your satisfaction is important to us. To help serve you better, please take a few minutes to complete our Customer Satisfaction Survey.
5 \ USER OPERATION MANUAL: Evidence-Bench I. Product Information series of laboratory work tables are designed specifically for high volume The Air Science Evidence-Bench ™ processing of forensic evidence by multiple users. Professional design and construction features offer conveni- ence during use, cleaning and maintenance. This unit does not offer product and/or sample protection.
» Do not discard the packaging material until you have checked all of the components, installed and tested the unit. 2.2 Packaging Contents A copy of your factory test report and certificate of conformance can be obtained by contacting Air Science and providing the product model and serial numbers. Air Science ® 120 6th Street Fort Myers, FL 33907 T 239-489-0024...
» Always ensure unit is connected to a reliable and properly grounded receptacle. » Appliance inlet on this device is the disconnect device; appliance should not be positioned so that it is difficult to operate it. Air Science ® 120 6th Street Fort Myers, FL 33907...
5. Connect unit to the main power supply and turn on the blower. Each unit requires its own dedicated 13A (230V) or 15A (115V) power outlet which should not be shared with other appliances. 3.4 Set Up Your Air Science product is shipped in one piece. Do not lift the table by the work surface. Air Science ®...
7. Following a major spillage, the filters must be changed, as the heat of wetting may reduce the efficiency of the filter. After a period of stabilization, the old filters may be reused, providing they have not reached the saturation level. 8. The electrical equipment in the unit is not in the dirty air stream of the system. 9. The system should not be used in a flammable room atmosphere. Specially modified cabinets are available Air Science ® 120 6th Street Fort Myers, FL 33907 T 239-489-0024 Toll Free 800-306-0656 F 800-306-0677 www.airscience.com...
Page 10
• Use absorbent pads on the work surface where appropriate to minimize splatter and aerosol generation in case of spillage. • Keep lids/covers on all containers, dishes or sample plates. Air Science ® 120 6th Street Fort Myers, FL 33907...
. Before commencing this schedule it is important to ensure the unit is safe to work on . 6.2 General Cleaning Wipe down the unit with only soapy water. Air Science ® 120 6th Street Fort Myers, FL 33907...
» Adjust the screw to make the alarm show. You may have to repeat these steps to ensure an accurate setting has been achieved. » Remove the blockage and restart the machine. The red/amber neon should not be illuminated. Air Science ® 120 6th Street...
• Please note, sometimes after new filters are fitted, it may be necessary to recalibrate the airflow system. This procedure can be found in Calibration - page 6.7 Airflow Adjustment The speed controller can be accessed behind the main control panel. Air Science ® 120 6th Street Fort Myers, FL 33907 T 239-489-0024 Toll Free 800-306-0656 F 800-306-0677 www.airscience.com...
14 \ USER OPERATION MANUAL: Evidence-Bench 6.8 Maintenance Schedule Please follow the suggested maintenance schedule in order to maintain your Air Science product at its optimum performance. Monthly Semiannually 1. Replace all HEPA filters. 1. Using a damp cloth, clean the exterior surfaces, particularly the front and top, to remove any 2.
15 \ USER OPERATION MANUAL: Evidence-Bench VII. Unit Assembly 7.1 Assembly For Flat Pack Units Air Science ® 120 6th Street Fort Myers, FL 33907 T 239-489-0024 Toll Free 800-306-0656 F 800-306-0677 www.airscience.com...
Page 16
16 \ USER OPERATION MANUAL: Evidence-Bench Air Science ® 120 6th Street Fort Myers, FL 33907 T 239-489-0024 Toll Free 800-306-0656 F 800-306-0677 www.airscience.com...
5. Carefully install the roll of material by placing the exposed ends of the dowel into the dowel sockets. Lastly, a simple push on the blade will rest it securely against the material. It is now ready to dispense. Air Science ®...
2. This portable lamp is polarized (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter the plug. Air Science ® 120 6th Street Fort Myers, FL 33907...
Page 19
19 \ USER OPERATION MANUAL: Evidence-Bench Air Science ® 120 6th Street Fort Myers, FL 33907 T 239-489-0024 Toll Free 800-306-0656 F 800-306-0677 www.airscience.com...
Designed to handle chemicals normally used in a university level chemistry curriculum. Designed for military applications involving war gasses. HEPA/UPLA Powders, particulates and biologicals. Universal filtration. Air Science ® 120 6th Street Fort Myers, FL 33907 T 239-489-0024 Toll Free 800-306-0656 F 800-306-0677 www.airscience.com...
Need help?
Do you have a question about the EvidenceBENCH EVB-72 and is the answer not in the manual?
Questions and answers