Page 1
Washing machine XQG90- WB24UMZ31W User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
Page 6
en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
Page 8
en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
Safety en 1.6 Safe cleaning and maintenance Take note of the safety instructions when cleaning and performing maintenance work on the appliance. WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff.
en Preventing material damage Make sure that the length of the ▶ Preventing material damage 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be Follow these instructions to avoid ma- Preventing material damage able to operate properly.
Environmental protection and saving energy en Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the tumble mediately if they come into contact dryer afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy...
en Installation and connection Remove any packaging and pro- ¡ Water inlet hose tective covers completely from the → "Connecting the water inlet appliance. hose", Page 15 ¡ Cover plate → "Disposing of packaging", Page 11. 4.3 Requirements for the in- Check the appliance for visible stallation location damage.
Installation and connection en Tilt the appliance to the rear. Installation loca- Requirements tion Against a wall Do not trap the hoses between the wall and the appliance. ATTENTION! Residual water may freeze. Freezing residual water may damage the appli- Remove the bottom foam tray and ance and frozen hoses may burst.
en Installation and connection Unscrew and remove all 4 screws for the transit bolts with a WAF 13 wrench. 4.5 Removing the transit bolts Pull the power cable out of the The appliance is secured for trans- holder. portation using transit bolts on the rear of the appliance.
Installation and connection en Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4"). Press down on the 4 cover caps. Open the water tap carefully and check that the connection points are tight. Water outlet connection types This information is intended to help you to connect this appliance to the water outlet.
en Installation and connection Screw the lock nuts tightly against Plastic pipe with Fix and secure the housing using a WAF 17 rubber sleeve or the water outlet wrench. gully hose with an el- → Page 27. 4.7 Aligning the appliance In order to reduce noise and vibra- tion and to prevent the appliance from moving, align the appliance cor- In doing so, hold the foot tight and...
Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
en Familiarising yourself with your appliance 5.2 Detergent drawer Measuring aid for liquid deter- gent → "Installing the auxiliary dis- penser compartment for li- quid detergent", Page 28 Compartment II: ¡ Detergent for main wash ¡ Water softener ¡ Bleach ¡ Stain remover Compartment ¡...
Before using for the first time en Pour standard washing powder Before using for the first time 6 Before using for the into compartment II. first time Prepare the appliance for use. Before using for the first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory.
en Display Display 7 Display The display shows the current settings, options or relevant information. Display display Designation More information 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining 8h "Ready in" time → "Buttons", Page 22 0 - 1200 Spin speed Set spin speed in rpm.
Page 21
Display en display Designation More information Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 30 Foam detection The appliance has detected too much system foam.
en Buttons Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons You can see the selection options for each programme in the overview for . Button Selection More information ¡ Start Start, cancel or pause the pro- 开始 / 添衣...
Page 23
Programmes en Programmes 9 Programmes Programmes Note: The laundry's care labels provide you with additional information about programme selection. Care symbols on the care labels Programme Description Max. load (kg) cotton Wash hard-wearing items made from cotton, linen or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate 加速.
Page 24
en Programmes Programme Description Max. load (kg) ¡ Max. 800 rpm Wool Hand- or machine-washable items that are made from wool or contain wool. To prevent the laundry from shrinking, the drum moves the items very gently with long pauses. Use a detergent that is suitable for wool. Programme setting: ¡...
Page 25
Programmes en Programme Description Max. load (kg) Note: Use the Silk programme to wash shirts and blouses made from silk or delicate fabrics. Programme setting: ¡ Max. 60 °C ¡ Max. 800 rpm Down Wash pillows, duvets or clothing stuffed with down and fillings with synthetic fibres. Wash large items separately.
en Programmes Programme Description Max. load (kg) Do not use liquid detergent or detergent that is in- tended for woollens or delicates. Quick 15'/30' Wash items made from cotton, or synthetic or blen- ded fabrics. Short programme for small items of lightly soiled laundry.
Detergents and care products Notes forehand. ¡ More detailed instructions for use – Empty any pockets can be found on www.siemens- – Brush sand out of all collars and home.bsh-group.cn or by scanning pockets the QR code on the title page of –...
Place the laundry in the drum. scanning the QR code in the table of Close the door. contents or on www.siemens- Ensure that there is no laundry home.bsh-group.cn. trapped in the door. 13.1 Switching on the appli- 13.5 Installing the auxiliary...
Basic operation en 13.6 Using the auxiliary deter- 13.9 Changing the activated gent dispenser compart- "Ready in" time ment If you have set and activated a "Ready in" time for a delayed pro- You can use the auxiliary dispenser gramme start, you can change the compartment in the detergent drawer "Ready in"...
Basic settings 15 Basic settings You can configure the appliance to Basic settings meet your needs. Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.siemens- home.bsh-group.cn.
Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.siemens- home.bsh-group.cn. 16.1 Cleaning the drum Pull out the insert upwards. CAUTION...
en Cleaning and servicing Fit the insert and click it into place. 16.3 Cleaning the auxiliary li- quid detergent dis- penser compartment If there is liquid detergent residue in the auxiliary compartment: Pull out the dispenser drawer and remove the auxiliary compartment by grasping the front end and pulling upwards.
Cleaning and servicing en Reinsert the siphon cap into the Open and remove the service flap. auxiliary compartment (making sure to align the installation marks) and push down firmly until it clicks into place. Slide a sufficiently large container under the opening. Place the auxiliary compartment back into the detergent drawer.
Page 34
en Cleaning and servicing Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 33 hot. Since water may remain in the Do not touch the hot detergent ▶...
Page 35
Cleaning and servicing en Insert the pump cap. Turn on the water tap. Insert the mains plug. Switch on the appliance. Pour 1 litre of water into compart- ment II. Select a suitable programme for draining. → "Programmes", Page 23 Screw the pump cap as far as it will go.
en Troubleshooting Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 37
Troubleshooting en Fault Cause and troubleshooting "E:36 / -10" Ensure that the pump cap is screwed in all the way ▶ into the appliance. The handle on the pump cap must be in a vertical position. → "Cleaning the drain pump", Page 34 The water pressure is low.
Page 38
en Troubleshooting Fault Cause and troubleshooting "E:30/-20" Detergent dosage is too high. Reduce the amount of detergent for the next wash- ▶ ing cycle with the same load. Additional water is added. Do not add any extra water to the appliance while it ▶...
Page 39
Troubleshooting en Fault Cause and troubleshooting The water is not drain- Drain pipe or water drain hose is caught or jammed. ing. Ensure that the drain pipe and water drain hose are ▶ not kinked or trapped. Drain pump is blocked. → "Cleaning the drain pump", Page 33 ▶...
Page 40
en Troubleshooting Fault Cause and troubleshooting The programme dura- Not a fault – no action required. ▶ tion changes during Note: When loading, where possible, place large and the wash cycle. small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
Page 41
Troubleshooting en Fault Cause and troubleshooting High spin speed not Note: Where possible, mix large and small items in reached. the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Spin programme. ▶ The spin programme Drain pipe or water outlet hose is blocked. does not start.
Page 42
en Troubleshooting Fault Cause and troubleshooting Creasing. Select the programmes that are suitable for the ▶ type of fabric. Detergent or fabric Too much detergent/fabric softener in the detergent softener drips off the drawer. seal and collects on When dosing liquid detergent and fabric softener, ▶...
Page 43
Troubleshooting en Fault Cause and troubleshooting Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. Connect the water supply hose correctly. Connect- ing the water inlet hose Tighten the screw connection. Water is leaking out at The water outlet hose is damaged.
18.1 Removing the appliance → "Before using for the first time", Note: More detailed instructions for Page 19. use can be found on www.siemens- home.bsh-group.cn or by scanning the QR code on the title page of this user manual. Turn off the water tap.
Customer Service en 18.4 Disposing of old appli- Customer Service 19 Customer Service ance If you have any queries on use, are Customer Service Valuable raw materials can be re- unable to rectify faults on the appli- used by recycling. ance yourself or if your appliance needs to be repaired, contact Cus- WARNING tomer Service.
en Consumption values Water pressure ¡ Minimum: Consumption values 20 Consumption values 100 kPa (1 bar) Consumption values ¡ Maximum: Model WB24UMZ31W 1000 kPa Class (10 bar) Energy consump- 0,800 kWh/cycle Length of the wa- 120 cm tion ter inlet hose Water consump- 62,0 l/cycle Length of the wa- 150 cm tion ter outlet hose...
Applicable standard en GB 17625.1 Electromagnetic compatibility – Limits – Limits for harmonic cur- rent emissions (equipment input current ≤16 A per phase) GB 12021.4 Maximum allow- able values of grades of energy efficiency and water efficiency for household electric washing machines GB 4706.24 Safety of house-...
Need help?
Do you have a question about the XQG90-WB24UMZ31W and is the answer not in the manual?
Questions and answers