Brother QL-820NWB Setup Manual

Brother QL-820NWB Setup Guide
Shipment Content:
1 x Label Printer
1 x Power Adapter (2 parts)
1 x RJ45 12' Ethernet Cable
1 x USB Printer Cable
1 x Blue Protective Box
1 x Rechargeable Li-Ion Battery
(Optional/Pre-Installed)
Quick Setup:
1. Connect the Power Cord to back of the
printer and the other end to a power outlet.
2. Open the printer top lid & load the DK Roll
by pushing the cartridge into the printer.
3. Insert the DK Roll paper with the upright
edge into the Label Output Slot.
Push the label through until the
end reaches the marked point.
Scan the QR code for video reference>>
4. Close the cover by pushing down on it.
You can push feed to advance a label through the
printer.
5. Connect the printer using Bluetooth:
a. Press the Menu button.
b. Press the up or down button to select the
Bluetooth menu and set Bluetooth On/Off
to On.
c. Make sure Automatic Reconnection is also
set On.
d. Use Bluetooth menu on your mobile
device to find your printer and connect.
For multiple printers, connect and turn them On
individually.
Setup Video Guide:
Scan this QR code
with your phone
camera for video.
RENTAL EQUIPMENT
6. Connect the printer using Ethernet:
a. Turn the printer ON.
b. Press the Menu Button.
c. Press the up or down button to select the
WLAN Menu.
d. Press the up or down button to set the
WLAN On/Off to OFF.
e. Turn the Printer OFF.
f. Connect the ethernet cable to the back of
your printer and into LAN ports 1-4 of your
router.
g. Turn the printer ON.
7. Connect the printer using Wi-Fi:
a. Turn the printer ON.
b. Press the Menu Button.
c. Press the up or down button to select the
WLAN menu.
d. Select Infra Manual Settings and press OK.
e. The printer will then search for available Wi-Fi
networks.
f. Select the desired SSID and enter
the password to the network.
Scan the QR code for video reference>>
8. Connecting printer via USB:
a. Printer Driver must be installed for operation. It
is available in choose2rent.com/help
b. Start with the Printer turned OFF. Make sure
that the printer is OFF before connecting the
USB cable.
c. Connect the USB cable to the back of the
printer and the other end into your PC.
d. Turn the printer ON.
SETUP GUIDE
WLAN must be OFF!
Contact our Support Team:
www.choose2rent.com/help
+1 (800) 622-6484 Ext. 3 (USA)