OMT FBA-BBTC00100 Instructions

Precision Oil Funnel
Instructions
Safety Information
Caution!
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Stay alert, watch what you are doing, and use
common sense when using this product.
• Use safety equipment appropriate for your
work. Always wear eye protection. If you will
be adding oil to a hot engine, carefully avoid
all heated surfaces or wear appropriate hand
protection.
• Do not overreach. Keep proper footing and
balance at all times.
• Be careful of the placement of this funnel, as
certain vehicle fluids are corrosive and may
damage your vehicle's paint.
Specifications
Material Nylon 66
Funnel Volume 2.1 qt.
Case
15.5×11.8×5 in.
Dimensions
Net Weight 4.7 lb.
Operation
1. If you need to measure your vehicle's oil level
before use, check while the engine is cold
or wait 10–15 minutes after use to allow an
accurate reading.
2. Remove the filler cap from your oil reservoir.
3. Join the funnel to the connector which best fits
your oil fill port, according to the table below.
4. Gently pour your oil through the funnel.
5. Detach the connector from the fill port and
replace the filler cap.
6. Detach the connector from the funnel and
wipe away any excess oil.
Parts Diagram
Connector #1
2 L
39×30×12.5 cm
2.15 kg
Connector #3
Funnel Neck Extension
Connector #6 Connector #7
V20220928
Connector #2
Funnel
Connector #4
Connector #5
Connector #8