Download Print this page
Russell Hobbs RHTRW3S Operating Manual

Russell Hobbs RHTRW3S Operating Manual

43” tower fan

Advertisement

Quick Links

43"
TOWER FAN
Operating Manual
RHTRW3S
RHTWR3S
1
Revision 2.0

Advertisement

loading
Need help?

Need help?

Do you have a question about the RHTRW3S and is the answer not in the manual?

Questions and answers

Summary of Contents for Russell Hobbs RHTRW3S

  • Page 1 43” TOWER FAN Operating Manual RHTRW3S RHTWR3S Revision 2.0...
  • Page 2 GUARANTEE At Russell Hobbs, we take all our customer feedback seriously. 0345 209 7461 Feel free to contact our Product Care Team, on who will be more than happy to assist you. This product is guaranteed for 12 months from the date of the original purchase. If any defect arises due to faulty materials or workmanship, the faulty product must be returned to the place of purchase.
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS • It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts. • Do not use with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • Page 4 PARTS 1. Control Panel 2. Air Inlet 3. Air Outlet 4. Base (Requires assembly) 5. Base Securing Nut 6. Remote RHTWR3S...
  • Page 5 ASSEMBLY Step 1 Take the two parts which form the base and align the centres, then hold in a cross formation. Rotate one of the two pieces to align the hole and click into place. Step 2 If attached, remove the plastic securing nut from the screw fixing on the base of the fan.
  • Page 6 FUNCTIONS On/Off Oscillation Timer Speed Selection Mode Selection Oscillation When the fan is on, press the oscillation button and the fan will begin oscillate 85° side to side Timer (Auto Shut Off) Your fan can be scheduled to switch off after reaching between 1-7 hours of operation.
  • Page 7 FUNCTIONS Timer (Auto Start) Your fan can be scheduled to switch on after reaching between 1-7 hours of standby. When the fan is in stand by mode, press the timer button. Pressing the timer button again will increase the time up to 7 hours. The indicator lights will illuminate as below: •...
  • Page 8: Remote Control

    MODES Normal Mode This should be used for everyday operation when simple On/Off functionality is desired. All additional functions such as Speed Selection and Timer can be used. Sleep Air This mode gradually decreases the fan speed to the lowest setting over 30 minutes, helping you fall asleep naturally and reduces overall energy consumption.
  • Page 9 NOTES The fan doesn’t switch on • Check the fan is plugged in • Check the socket is switched on • Check another appliance in the socket • Unplug and check for any obvious signs of damage to cord or plug •...
  • Page 10 IMPORTANT! KEEP BLADES CLEAN! Wipe the blades with a damp cloth at least once every 3 months. The blades may require more frequent cleaning if in a dusty environment. MONTHS Ensure that the fan is unplugged before cleaning. This product is guaranteed for 12 months from the date of the original purchase.
  • Page 11 NOTES RHTWR3S...
  • Page 12 Russell Hobbs is a registered trademark used under license from Spectrum Brands (UK) Ltd. Made under license by Product Care Trading Limited, Wigan, WN2 4AY/ PCT (NI) Ltd, Belfast, BT5 5AD Russell Hobbs Support: call 0345 209 7461 or visit mda.russellhobbs.com...