Listening To A Cd - Sharp QT-CD180 Operation Manual

Portable cd stereo system
Table of Contents

Advertisement

Listening to a CD

Precautions:
G When "Cd" or track number is displayed, the power is connected.
If you will not be using the CD player, set the FUNCTION switch to OFF.
G Do not open the CD compartment while the disc is rotating.
G If the disc is damaged, dirty, or loaded upside down, the total number
of tracks will not appear. Clean, replace, or reload the disc properly.
G Keep foreign objects out of the CD compartment.
G Subjecting the unit to shock or vibration may cause mistracking.
G Keep the CD compartment closed except when loading discs.
G Playing certain compact discs at a high volume may cause mistracking.
In this case, listen at a lower volume.
G If TV or radio interference occurs during CD operation, move the unit
away from the TV or radio.
6
1
Set the FUNCTION switch to CD.
2
Open the CD compartment.
3
Place a compact disc on the spindle, label side up.
3" (8 cm) discs may be played without an adaptor.
4
Close the CD compartment.
5
Press the PLAY/PAUSE 0 6
0 6 button to start playback from track 1.
0 6
0 6
0 6
To interrupt playback:
Press the PLAY/PAUSE 0 6 button during playback.
Press the PLAY/PAUSE 0 6 button again to resume playback.
To stop playback:
Press the STOP I button.
To listen to the track being played again:
During playback, press the REVIEW/DOWN 5 button.
To move to the beginning of the next track:
During playback, press the CUE/UP 4 button.
Notes:
G To skip a number of tracks at one time, press the REVIEW/DOWN 5 or
CUE/UP 4 button repeatedly until the desired track number is shown.
G To start playing a desired track, press the REVIEW/DOWN 5 or CUE/
UP 4 button while in the stop mode to select the track number, and
then press the PLAY/PAUSE 06 button.
To fast forward audibly (Cue):
During playback, hold down the CUE/UP 4 button.
To fast reverse audibly (Review):
During playback, hold down the REVIEW/DOWN 5 button.
Notes:
G When the end of the disc is reached while cueing, "En" will appear in the
display and CD operation is paused. Press the REVIEW/DOWN 5 but-
ton for fast reverse or press the STOP I button to stop CD operation.
G If the beginning of the disc is reached while reviewing, the mode will au-
tomatically switch to normal playback at that point.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cd180

Table of Contents