Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HOTO QWSDT004
Summary of Contents for HOTO QWSDT004
- Page 1 HOTO Flashlight Power...
- Page 2 Stay tuned to our social media (@hoto_official)
-
Page 3: Safety Instructions
Safety Instructions Please use the flashlight correctly as described in this manual. WARNINGS Do not let children use the seat belt cutter and window breaker. Do not leave the flashlight in a car or in direct sunlight for a long time in hot weather, as it may overheat and cause burns. - Page 4 The battery is at its best performance when used at room temperature (20°C ± 5°C). If the flashlight needs to be disposed of, the battery must be removed. The flashlight must be turned off before the battery is removed. Please recycle and dispose of the battery in a proper and environmentally friendly manner.
- Page 5 Charging Please use a charger that meets the flashlight's specifications. If the flashlight has not been used for a long period of time and the battery level indicator does not work properly when charged again, continue charging for 30 minutes and then check whether the battery level indicator works normally.
-
Page 6: Product Overview
Read this manual carefully before use, and retain it for future reference. Product Overview Thank you for using the HOTO Flashlight Power. Battery Strike Bezel Level Tailcap Indicator Beam On/Off Seat Belt Adjuster Button Cutter Type-C Side Window Charging Port... - Page 7 How to Use Charging The flashlight must be fully charged before its first use. Slide the beam adjuster upwards to expose the Type-C charging port and insert the charging cable to charge. Note: The flashlight comes with a Type-C charging cable. When the flashlight is charging: Main light: Only low light can be enabled.
- Page 8 Strobe mode/SOS mode: Press and hold the on/off button for 3 seconds at any time to turn on the strobe mode, then press again to cycle through: SOS mode - strobe mode. Press and hold the on/off button again for 0.5 seconds to turn the flashlight off.
- Page 9 Window breaker Unscrew the tailcap, place the end of the window breaker perpendicular to the window and press hard. The window breaker nail will pop out and break the glass. Once you let go, the window breaker nail will go back inside the flashlight. Magnetic base The magnetic base can be attached to any magnetic surface containing...
-
Page 10: Troubleshooting
Troubleshooting Issues Possible Causes Solutions The battery Low battery Charge the level indicator power flashlight. remains red when you turn on the flashlight. The battery 1. The Type-C 1. Use the level indicator charging cable charging cable does not light isn't plugged in or provided, and up when... -
Page 11: Specifications
Specifications Model: QWSDT004 Item Dimensions: 188 × 40.5 × 36 mm Net Weight: Approx. 240 g Input: 5 V 1.5 A IP Rating: IP54 Battery Type: Lithium-ion Battery Battery Rated Capacity: 3100 mAh Battery Rated Voltage: 3.6 V Charging Time: Approx. 180 min Main Light Specifications... -
Page 12: Regulatory Compliance Information
Federal Communications Commission Supplier’s Declaration of Conformity This supplier’ s declaration of conformity is hereby for Product: HOTO Flashlight Power Model Number(s): QWSDT004 Brand/Trade: HOTO We declare that the above mentioned device has been tested and found in compliance with CFR 47 Part 15 Regulation. - Page 13 Consult the dealer or an experienced radio/TV technician for help. Representative of Responsible Party for SDoC Company: Shanghai HOTO Technology Co., Ltd. Address: Building 45, No.50 Moganshan Road, Shanghai, China Country: China Telephone No.: 400-021-8696 Manufacturer: Shanghai HOTO Technology Co., Ltd.
Need help?
Do you have a question about the QWSDT004 and is the answer not in the manual?
Questions and answers