Summary of Contents for Forever Redwood THE PALOMAR ROUND PAVILION
Page 1
619-639-7503 or 619-677-1965 -Direct Lines for the Engineering Department 7am – 5pm Pacific Time, Monday - Friday ASSEMBLY INSTRUCTIONS FOR THE THE PALOMAR ROUND PAVILION (CUSTOM)
Page 2
NOTE: To assemble your product, you need a Hammer, a Ratch, a Drill, and an impact drill. For bigger structures, a forklift may be needed too. Required Tools (Are not included in your hardware packing). PROCESS TO INSTALL THE HARDWARE PROVIDED. To install the bolts.
Page 3
To install the lag bolts. Place the washers in their lag bolts. After that, insert the lag bolts into the holes and carefully tighten it using a ratchet with the necessary socket. Use the washers only for the Wood Pieces. To install the deck screws.
Page 4
Step 1: Install the L-Brackets to the ground with ½´´ x 4´´ anchor bolts. Step 2: Attach the floor supports with 3/8´´ x 6´´ lag bolts ( )and 3/8´´ x 8´´ lag bolts ( P| 3 MRE-Formato-4-7-043 Rev. A NCDOCT0623-096...
Page 5
Step 3: Attach the floor supports to the L-Brackets with 5/16´´ x 3´´ Lag Bolts. Step 4: Assemble the frame floor with 3´´ deck screws. P| 4 MRE-Formato-4-7-043 Rev. A NCDOCT0623-096...
Page 6
Step 5: Attach the floor boards with 2 ½´´ deck screws. Step 6: Use 3/8´´ x 4´´ lag bolts to attach the posts to the floor. P| 5 MRE-Formato-4-7-043 Rev. A NCDOCT0623-096...
Page 7
Step 7: Attach the supports to the posts with 3/8´´ x 5 ½´´ bolts ( ). The supports will be attached together with 3/8´´ x 8´´ bolts ( ). Step 8: Use 5/16’’ x 3’’ lag bolts to attach the railings to the posts, the floor and to the supports. P| 6 MRE-Formato-4-7-043 Rev.
Page 8
Step 9: Attach the braces to the posts with 3/8´´ x 8´´ bolts ( ) and 3/8´´ x 10´´ bolts ( ). Step 9.1: Use 3/8´´ x 6´´ bolts ( ) to attach the braces to the supports. Step 9.: Use 3/8´´ x 7´´ bolts ( ) to attach the braces to the railings. Step 10: Attach rafters to the supports with 3/8´´...
Page 9
Step 11: Use 1 5/8´´ deck screws to attach the roof boards T&G to the rafters. Step 12: Use 1 5/8´´ deck screws to attach the overlapping roof boards the rof boards T&G. P| 8 MRE-Formato-4-7-043 Rev. A NCDOCT0623-096...
Page 10
Step 13: Use 4´´ deck screws to attach covers to the roof boards. Step 14: Finally, use 5/16´´ x 5´´ bolts to attach the ceiling fan base. P| 9 MRE-Formato-4-7-043 Rev. A NCDOCT0623-096...
Page 11
This completes the Pavilion Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (619-639-7503 or 619-677-1965) or email us. We are here to support you. P| 10 MRE-Formato-4-7-043 Rev.
Need help?
Do you have a question about the THE PALOMAR ROUND PAVILION and is the answer not in the manual?
Questions and answers