Poly Lens Room; Register The Poly Studio Base Kit G9 Plus With Poly Lens During Setup - HP Poly Studio Base Kit G9 Plus Solution Manual

5

Poly Lens Room

Poly recommends that you use Poly Lens to manage your Poly Studio Base Kit G9 Plus and connected
peripherals. With Poly Lens, actively manage your devices, capture room analytics, and update software
on your Poly TC10 device or Poly Studio cameras. Poly Lens Room allows you to onboard and manage
your Poly Studio Base Kit G9 Plus components from your Poly Lens cloud account.
Register the Poly Studio Base Kit G9 Plus with Poly Lens during
setup
During the Poly Studio Base Kit G9 Plus setup process, register your conferencing PC with Poly Lens
using a PIN code.
Before onboarding your device using Poly Lens Room, review the
table to ensure that Poly Lens Room can load and communicate to Poly Lens Cloud.
1. To locate your Poly Lens PIN code:
a. On the paired Poly TC10, select Settings > Admin
b. Enter the admin username and password.
c. At the bottom of the page, find Poly Lens, and select Onboard Device with PIN.
NOTE:
Lens Room. In Poly Lens Room, select Onboard Device with PIN.
The application generates a PIN code. It may take up to 60 seconds to generate.
2. On the conferencing PC or a separate computer, access Poly Lens at https://lens.poly.com.
3. Sign up or log in to your account.
4. Go to Manage > Register Device.
5. Locate PIN or QR Code Onboarding and select Register a single device.
6. Select the Device is a PC-Based Room System check box.
7. Copy the PIN code from Poly Lens Room.
8. Enter or paste the PIN code into the Device PIN field.
9. Enter the Device Name and system location information.
10. Select Register Device.
Alternatively, you can log into the admin account on the conferencing PC and open Poly
Ports and Protocols for Poly Lens Apps
Poly Lens Room 11