Configuring Microsoft Teams Rooms; Set Up Microsoft Teams Rooms; Unpair A Poly Tc10 Device - HP Poly Studio Base Kit G9 Plus Solution Manual

3. Once upgraded to version 6.0.x, move your Poly TC10 from the public/corporate network to the link
local private network tied to the HP Mini IP Conferencing PC running MTRoW.
4. The Poly TC10 device running 6.0.x automatically pairs with the PC.
5. The Poly TC10 device automatically upgrades to the current approved and tested version during the
nightly scheduled upgrade window.

Configuring Microsoft Teams Rooms

After you complete the initial system setup, set up and configure Microsoft Teams Rooms.

Set up Microsoft Teams Rooms

Set up and configure Microsoft Teams Rooms to work with your Poly Room Kit.
For detailed instructions on completing your configuration, visit
at the Microsoft website.
1. Accept the Microsoft Software License Terms.
2. Enter your Microsoft Teams Rooms account information.
For more information, review
3. Select Next.
Microsoft Teams Rooms opens and displays on the room monitor and the Poly TC10 controller.

Unpair a Poly TC10 device

To use the Poly TC10 in a different conference room, unpair it from the PC, take it to the new conference
room and plug it into the new room system.
To unpair a Poly TC10 from a PC:
1. Tap on the Poly button at the bottom of the Poly TC10 screen (or swipe in from the left of the screen).
2. Go to Settings > Admin Settings.
3. Enter the admin login credentials.
4. Select the device to unpair. Select Disconnect.
10 Chapter 4 Poly Studio Base Kit G9 Plus out-of-box setup
Configure accounts for Microsoft Teams
Initial Setup for Microsoft Teams Rooms
Rooms.