DSC WLS909 Operating Instructions

WLS909
Wireless Key
OPERATING INSTRUCTIONS
The WLS909 wireless key allows you to arm
and disarm your alarm system, as well as
perform other keypad functions, from a unit
small enough to keep in your pocket.
Together with your installer, you can decide
which functions you wish to have accessible
from your portable key.
To activate any one of the four selected
functions, press and hold the appropriate
button for two seconds. Your installer will
indicate each function by applying a circular
label beside each of the four buttons.
Signals will not be received if the
key is not within the range of the
wireless receiver.
Some of the most commonly used functions are as follows:
Stay Arming
Press this button to arm your system in the Stay mode. All perimeter zones
will be armed, such as all window and door contacts, but the interior zones
will remain inactive, allowing you to stay on the premises without setting off
an alarm.
Away Arming
Press this button to arm your system in the Away mode. Both the interior
and exterior zones will be armed, allowing you to exit the premises.
Disarm
Press this button to disarm your system. You do not have to enter your
access code when you use the key to disarm the system.
Fire
Press this button to notify your central monitoring station of a fire condition.
Auxiliary
Press this button to notify your central monitoring station of a non-medical
emergency. Please discuss the functionality of this button with your installer.
Panic
Press this button to notify your central monitoring station of a situation
requiring the police, such as a break-in.
Other options are available. Please discuss all WLS909 options with your
installer in order to program the best possible combination to suit your needs.
four
option
buttons
key
ring
WLS909