Table of Contents
Advertisement
Tuning will be in increments of 100 kHz.
The display will show that manual tuning is currently
active with
. If the right control knob
turned within a short time,
will disappear from
the display and manual tuning is turned off.
Manual AM tuning
In the AM waveband, press
.
Rad
.m Am As
Press multifunction key
twice.
Then turn the right control knob
.
Tuning will be in increments of 9 kHz.
The display will show that manual tuning is currently
active with
. If the right control knob
turned within a short time,
will disappear from
the display and manual tuning is turned off.
32
5. Radio Mode
5.6. Regionalization
The RBDS/RDS diversity function is independent of
is not
region. Under these conditions, the RBDS/RDS di-
versity function may switch among various regional
programs with different broadcast contents. If this
should be the case, directly select the special regional
sub-program.
If several regional programs are transmitted by one
station, this can only be realized when the station is
selected.
Stations with additional regional programs are indi-
cated with a star (i.e.
).
101.3
Upon selection of one of these stations (e.g.
receivable regional sub-programs for this station will
is not
be displayed.
Then select the desired regional sub-program
(e.g.
).
Select
If, despite the RBDS/RDS diversity function, the re-
ception of a regional sub-program is inferior, bear in
mind that regional sub-programs are transmitted for
the most part over only a few frequencies. Therefore,
the unit has fewer frequencies with stronger signals to
switch to.
Switching regionalization on/off
Select radio menu mode.
on
138
Use multifunction key
on (
) or off (
).
Switching frequency display on / off
), all
Select radio menu mode.
.requency
.m
138
Use multifunction key
(Frequency display on) or
off).
to turn regionalization
to select
(Frequency display
Advertisement
Table of Contents
