Table of contents Table of contents ............................2 Important safety precautions ........................3 General introduction ............................ 5 Accessories..............................5 Controls and connection..........................6 Remote control (RC)............................ 8 General operations ............................10 OSD operations ............................11 Troubleshooting............................15 The causes of interference...........................15 Specifications .............................16...
Thank you very much for buying our product – the most natural Colour Television Receiver. To enjoy your set to the full from the very beginning, read this manual carefully and keep it for future reference. Important safety precautions Warning Please unplug the power cord from the AC outlet and contact our service personnel to repair under the fol- lowing conditions: Any obvious abnormality appears in the product, such as smoky, peculiar smell or strange sound.
Page 4
Do not place any vase, potted plant, cup, medicine and any container with water on this product. If the liquid is spilt, it may cause the fire, electric shock or breakdown. Do not install it at the place on the strong magnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.
Controls and connection Front view Back view 14 15 16 17 18 Power indication light 10. DC input jack Remote sensor 11. SCART jack Power button 12. PC audio in jack 13. VGA jack CH+/Up direction button CH-/Down direction button 14.
Page 7
Connect the TVRF source with the antenna port. TVRF signal including: You can use 75 coaxial cable to connect the outdoor antenna. Outdoor Antenna Connection: Use 75 coaxial cable plug or 300-75 impedance converter to plug in antenna input terminal on the rear of the cabinet.
Remote control (RC) POWER button. Press to turn on/off the TV set or to switch it to standby mode. MUTE button. Press to turn off/on the sound. Number buttons. Press to input figures. LAST CHANNEL button. Press to switch to the last watched channel.
Page 9
Insert the batteries in the RC Remove the battery cover by pressing the symbol and pulling the cover space in the direction of the ar- row. Insert the two 1.5V (AAA size) batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit.
General operations Press the POWER button on the unit or the remote control to switch on the power; the indication light will be in blue color. Press the POWER button again to switch off the power, and the light will be in red color.
OSD operations In this manual, the OSD Menu maybe changed and different from your real TV’s screen shown with- out further notice. Because this manual is just a sample to help you how to operate TV menu setting. PICTURE SETTING Press the MENU button on the remote control, there will be a menu displayed on the screen as below: Use the button firstly, the cursor will be on the line of “Picture Mode: Vivid”.
Page 12
Auto Tune Use the button firstly, the cursor will be on the line of “Auto Tune ”. And then, press the button again, a menu will be displayed as followed: As shown on the menu, the TV will automatically search stations. When searching, press the MENU button to cancel searching.
Page 13
On the menu, the words “Channel 1” indicate the current station and 6 is the station number; “Channel 2 ” means the destination station and 1 is the station number. The TV is playing the current station (6). Press button to keep the cursor on the line of “Channel 2”, you can enter into a station number from 1-200 button repeatedly to select ,to be as the appointed station number (***) for replacing the current station number.
Page 14
Timer Move the cursor to this line. And then, press the button, a menu will be displayed as followed: CURRENT Move the cursor to this line. The unit displays current working time. Press the button select hour or minute setting, and enter into numeric by button.
Troubleshooting Before calling a technician, please check the following items to see whether you can easily diagnose and fix the encountered symptoms on your own. Symptoms Possible Cause Correction The power cord is not plugged in. No picture, no Plug the power cord in. Contrast, brightness, sharpness, color and sound, and no Alter the value of contrast, brightness,...
Specifications Size (diagonal) 15” (38 cm) Brightness 250 (cd/m Contrast 450:1 LCD panel items Angle of view 140°/140° Speed response 16 ms Resolution 1024 x 768 Aspect ratio Color system PAL, SECAM Sound system DK, I, BG, L S-video in Composite video Input Composite video, RGB, Audio L+R...
Need help?
Do you have a question about the H-LCD1509 and is the answer not in the manual?
Questions and answers