Preparation For Spraying - Sprayers Plus LANDSCAPE PRO Instruction Manual

PREPARATION FOR SPRAYING

•
Always inspect your sprayer thoroughly before and after each use. Check to be sure
everything is securely attached and in good condition before pressurizing the tank.
•
Check the work area that the sprayer will be used in and remove or cover all valuables
that may be damaged by using sprayer.
• To reduce the risk of injury:
Watch out for children, pets, open windows, freshly washed cars. Spray safely (away
❖
from those).
Do not allow bystanders in work area.
❖
Do not point the sprayer nozzle in the direction of people or pets.
❖
Pay attention to the direction of breeze, do not work against the it.
❖
Never use the sprayer during windy conditions.
❖
Never point a sprayer nozzle toward an open flame, this is to avoid the possibility of
❖
ignition or explosion which may cause injury to yourself or damage to surroundings.
Always release pressure in the pump prior to filling, cleaning, or servicing the sprayer.
❖
Before opening a container of pesticide or other hazardous materials, carefully read,
❖
understand, and follow all instructions on the label.
•
Mix your chemicals in a separate container, then fill the sprayer. Do not mix formulas
inside the sprayer except with liquid fertilizers: fill sprayer with water BEFORE adding the
active ingredient.
•
Always sift the chemical/formula (with a screened funnel or strainer).
• Never fill the sprayer with hot liquids. Max. 30°C, or 85°F.
9