Acer ED343CUR V3 Quick Start Manual

Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
•
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Remove the screws of the base for use, align the neck with the base,and tighten the screws.
3. Clip the bracket into the notch of the rear housing in sequence and press it down. Hear a "click" and the installation
is completed.
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's
power cord.
2. Connect the signal cable to the HDMI (optional) and /
or DP (optional) input socket of the monitor, and the
HDMI (optional) and /or DP (optional) output socket
of the graphics card on the computer.
3. Insert the monitor power cable into the power port at
the back of the monitor.
4. Plug the power cords of your computer and your monitor
into a nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
Transmitting the 4K 180Hz signal via one DP 1.4 port.
FreeSync Premium :
It can allow a FreeSync Premium supported graphics source to dynamically adjust display refresh rate based on typical
content frame rates for power efficient, virtually stutter free and low-latency display update.
DP
HDMI2 HDMI1 DP2 DP1 AUDIO OUT
HDMI2 HDMI1 DP2
AC IN
DP1 AUDIO OUT