Table of Contents
Advertisement
Quick Links
Cisco Aironet 4.5-dBi Low Profile
Omnidirectional Antenna (AIR-ANT5145V-R)
This document describes the Cisco Aironet 4.5-dBi Diversity Omnidirectional Antenna
(AIR-ANT5145V-R), and provides instructions for mounting it. The antenna operates in the 5-GHz
frequency range and is designed for use indoors.
The following information is provided in this document.
Technical Specifications, page 2
•
System Requirements, page 3
•
Installation Guidelines, page 3
•
Safety Instructions, page 3
•
Installing the Antenna, page 4
•
•
Obtaining Documentation and Submitting a Service Request, page 8
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006 Cisco Systems, Inc. All rights reserved.
Advertisement
Table of Contents
Related Manuals for Cisco Aironet AIR-ANT5145V-R
Summary of Contents for Cisco Aironet AIR-ANT5145V-R
- Page 1 Omnidirectional Antenna (AIR-ANT5145V-R) This document describes the Cisco Aironet 4.5-dBi Diversity Omnidirectional Antenna (AIR-ANT5145V-R), and provides instructions for mounting it. The antenna operates in the 5-GHz frequency range and is designed for use indoors. The following information is provided in this document.
-
Page 2: Technical Specifications
3 in. (7.6 cm) Height 0.75 oz (21.2 g) Operating temperature –22°F – 158°F (–30°C – 70°C) Storage temperature –40°F – 185°F (–40°C – 85°C) UL2043 compliant Environment Indoor, office H-Plane Pattern E-Plane Pattern Cisco Aironet 4.5-dBi Low Profile Omnidirectional Antenna (AIR-ANT5145V-R) 78-16467-03... -
Page 3: System Requirements
System Requirements System Requirements This antenna is designed for use with Cisco Aironet access points and bridges but can be used with any 5-GHz Cisco Aironet radio device that utilizes reverse polarity Neil Councilman (RP-TNC) connectors. Installation Guidelines Because the antenna transmits and receives radio signals, they are susceptible to RF obstructions and common sources of interference that can reduce throughput and range of the device to which they are connected. -
Page 4: Installing The Antenna
Installing the Antenna Installing the Antenna The antenna ships with a mounting bracket and the hardware required to install the antenna on a suspended ceiling. Two mounting methods are available. You can mount the antenna using standard suspended ceiling T-rail clips or you can mount the antenna using the clips attached to the antenna mounting bracket. -
Page 5: Tools And Equipment Required
A pencil or suitable marker • Installing the Antenna Using T-Rail Clips Follow these steps to install the antenna using the T-rail clips. It may be helpful to refer to before you begin. Choose a location in which to install the antenna. - Page 6 Choose a location in which to install the antenna. Step 2 Remove the adjacent ceiling panels on each side of the T-rail on which the antenna is to be installed. Step 3 Cisco Aironet 4.5-dBi Low Profile Omnidirectional Antenna (AIR-ANT5145V-R)
- Page 7 Step 4 Step 5 Align the mounting clips with the edge of the ceiling T-rail where you want to mount the antenna. Step 6 Grasp the ceiling T-rail as closely as possible to the mounting bracket while pushing the clips securely onto the rail.
-
Page 8: Suggested Cable
Cisco currently supports RSS Version 2.0. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.