Speakerbus AYRE Faq

Question
GENERAL
How do I adjust the stand angle?
My AYRE is connected by Ethernet but the device will not
sign in?
How do I sign into AYRE?
How do I use the Intercom?
How do I put a line on a speaker?
How can I see what line a call came in on when looking
at the Call Log?
I am in a meeting and don't want to be disturbed. How
do I stop incoming alerts?
Speakerbus reserves the right to change this document without notice. It provides outline specification
only and cannot be used as the basis of any contract.
Reference: FAQ0003/R1. © Speakerbus Ltd 2024.
Updated 6 June 2024 www.speakerbus.com.
For further information email: info@speakerbus.co.uk
Telephone: +44 (0)20 7398 6800
AYRE Frequently Asked Questions
Answer
Use the stand release mechanism (push to release)
button on the rear.
Stand Release
Mechanism
(push to release)
Confirm you are using the correct username and
password. Password's are case sensitive.
Check AYRE's status; there should be two green
icons top right of the screen.
If either icons are not green, touch to display the
Health Status. Report the listed error(s) to your
System Administrator.
Enter the username and password into the User ID
and Password text boxes respectively. Ensure the
correct CloudBase is selected. Touch
Touch the Intercom
the search field or a number on the dial pad. Touch
to place call.
Drag the line appearance tile to an available speaker
tile.
Touch the Call Log
Inbound calls and lines are displayed in green,
example below. Inbound call from Deirdre Forrest
(1008) to line 1002.
Touch the Do Not Disturb
Repeat to deactivate.
Page 1
.
softkey. Enter a contact in
softkey.
softkey.