Introduction Thank you for choosing Bintelli Electric VehiclesWelcome to the family! Your comfort and safety are very important to us. We strongly recommend that you read and follow the operating instructions in this manual to avoid serious personal injury. Please make sure anyone operating your vehicle is familiar with the cart's functions.
Operating the Vehicle Contact your local DMV for rules and regulations regarding who may legally operate the vehicle. Switch the Tow/Run switch to the “Run” position. Make sure the Forward/Reverse switch is switched to Neutral before switching the ignition to “On”. Do not forget to disengage the parking brake.
Page 4
Safe Operation Instructions Our vehicles are designed for simple operations. However, please make sure to observe the following safe operation instructions. As with any new vehicle, always familiarize yourself with its controls. Perform checks on the battery, tires (recommended tire pressure is 30 psi), body/chassis, brakes, parking brake, and steering prior to operating the vehicle.
Vehicle Information The VIN plate is located on the base of the seat as shown. On a 4-passenger VIN plate is located on the base of the driver side. On the 6-passenger VIN plate is located on the base of the second row of seats. Chassis Number The Chassis number (also known as the serial number) is located on the passenger side behind the front wheel.
Dash Controls 1. Combination Switch **See Page 7 for the breakdown of the Combination Switch** 2. LCD Screen **See Pages 5 and 8 for the breakdown of the LCD Screen** 3. Locking Glove Box 4. Hazard Light Switch 5. Gear Selector 6.
LCD Screen As shown in the picture above, the screen is used to display the status of the vehicle, as well as control the radio. All the below icons can be seen on the LCD Screen. ● Power Button ● Home Icon ○...
Tow/Run Switch (AKA Off/On Switch) The Tow/Run switch is located under the seat where the battery compartment is located. Before operating the cart, make sure the Tow/Run switch is in the “Run” position. When towing or pushing the cart, flip the switch to the “Tow” position. Warning Pushing or towing the vehicle while in the “Run”...
Page 9
“Phone” function to connect your phone to Bluetooth. Go to your phone's Bluetooth settings and wait for “Pulse” to come up as one of the options. Once connected you should see the Bluetooth sign next to the time in the top right corner.
Page 10
2 weeks. If the temperature reaches 0°F, always keep the batteries fully charged to prevent the water from freezing, resulting in loss of battery life. **Please note the Pulse has an onboard charger with another charge indicator on the seat base** See the picture above.
Page 11
Maintenance The appropriate care must be used when performing maintenance, service, or accessory installation. Only trained technicians should service or repair the vehicle and/or battery charging system. Anyone doing even simple repairs or services should have knowledge and experience in electrical and mechanical repairs. Warning Before disconnecting or connecting the batteries, the Tow/Run switch must be in the “Tow”...
Page 12
Warning Only licensed technicians should be performing maintenance on batteries with the exception of checking and cleaning terminals while the batteries and vehicle are fully powered off. Please contact your local dealer or Eco Support for anything other than routine battery care. Features for Users Power Button Located on the side of the lithium battery.
Page 13
Lithium Resources Registering Eco Battery- 90 days after purchase for 8 year warranty Eco battery registration Submitting Warranty Claims- Eco Battery Warranty Claims Eco Battery Support- support@ecobattery.com For additional questions and customer support, please contact your local dealer or Bintelli manufacturer.
Need help?
Do you have a question about the PULSE and is the answer not in the manual?
Questions and answers