GET SX1 PRO Nstallation Manual page 3

6. To change SX1 Pro injection map, it is necessary to use GET
Maya programming software (sold separately).
7. If the bike does not start or the engine is irregular, be sure
that the SX1 Pro ECU chosen is compatible with your bike model
and year, verify that the ECU is connected properly, and always
perform a TPS calibration.
8. The original Mode button (blue) will not work when the SX1
PRO control unit is installed. For the GET SX1 PRO control unit
to function correctly, use only the GET SX1 Controller (included
in the kit).
9. The original Honda handlebar controller must not be removed
as it manages the engine shutdown functionality.
B. SX1 PRO SPECIFIC INSTALLATION
SX1 PRO is a fully programmable plug&play ECU. SX1 PRO is
the best solution both for original and modified engines: it is
possible to adjust the calibration map through both WiGET App,
by using the SX1 CONNECT device, and/or MAYA software.
WiGET App
The SX1 Pro ECU comes with two reprogrammable maps
developed by the GET R&D department:
- Map 1: Racing
- Map 2: Racing with GPA "Traction Control" Level 5.
3
EN