Complete Installation - Haier HWR08XCJ Use & Care Manual

Top View
Use a 1⁄8" drill bit to drill a starter hole through the bottom hole
5.
in the side curtain and into the window frame.
Insert one of the 31⁄32" screws through the bottom hole of the
6.
left-hand curtain and into the window frame.
7. Repeat for the right-hand curtain.
Bottom View

Complete Installation

1. Insert the foam seal behind the top of the lower window sash
and against the glass of the upper window.
A
A. Top of lower window sash
B. Foam seal
8
2. Place the window lock bracket as shown. Use a 1⁄8" drill bit to
drill a starter hole through the hole in the window lock bracket
and into the upper window.
3. Attach the window lock bracket to the upper window with one
31⁄32" screw to secure the window in place.
4. Plug into a grounded 3 prong outlet.
5. Press RESET on the power supply cord. See "Electrical
Requirements."
B