IP Phone Power Adapter Handset Quick Start Guide We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party accessories may result in reduced performance. Assembling the Phone 1. Attach the stand: You can also mount the phone to a wall.
Page 3
PoE Hub/Switch The IP phone should be used with Yealink original power adapter (5 V/0.6 A) only. The use of the third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we recommend that you use the Ethernet cable provided by Yealink.
Page 4
#ONÚGURING 9OUR 0HONE #ONÚGURING VIA WEB USER INTERFACE !CCESSING THE WEB USER INTERFACE 1. Press (the OK key) when the phone is idle to obtain the IP address of the phone. 2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or "192.168.0.10") and then press the Enter.
Page 5
Placing a Call Call Hold To place a call on hold: Using the handset: Press the Hold soft key during an active call. 1. Pick up the handset. 2. Enter the number and press the Send soft key. 4O RESUME THE CALL DO ONE OF THE FOLLOWING Using the speakerphone: •...
Page 6
If you press the Option soft key, you can also do the #ALL #ONFERENCE following: • Select Detail to view detailed information about the 1. Press the #ONF soft key during an active call. The call is placed on hold. entry.
We are Some dust, etc., may be in the port. not liable for problems with Yealink device arising from the use of this product; we are not 1. Clean the port.
Security Center Yealink provides a data protection mechanism, allowing you to decide whether to connect the phone to the DEVICE MANAGEMENT PLATFORM AND WHAT PRIVATE DATA YOU PERMIT TO REPORT &OR HOW TO ENABLE DATA PROTECTION see the user guide.
Need help?
Do you have a question about the SIP-T31W and is the answer not in the manual?
Questions and answers