Haier HSU-32LEA13-W Installation Manual page 2

113.5
Floor fixing dimensions
of the outdoor unit
(Unit:mm)
HSU-24LEB03(T3)
To this unit, both liquid and gas pipes shall be insulated
as they become Iow temperature in operation.
Use optional parts for piping set or pipes covered with
equivalent insulation material.
Indoor unit
1.Fitting of the Mounting Plate and Positioning of the wall Hole
When the mounting plate is first fixed
1.Carry out, based on the neighboring pillars or lintels, a proper leveling for the plate to be
fixed against the wall, then temporarily fasten the plate with one steel nail.
2. Make sure once more the proper level of the plate, by hanging a thread with a weight from
the central top of the plate, then fasten securely the plate with the attachment steel nail.
3. Find the wall hole location A using a measuring tape
2.Making a Hole on the Wall and Fitting the Piping Hole Cover
Make a hole of 60 mm in diameter,
slightly descending to outside the wall.
Install piping hole cover and seal it
off with putty after installation
583 113.5
PAS24L03-N(T3)
HSU-24HEA03(T3)
HSU-24LEA03(T3)
HSU-24HEA13(T3)
HSU-24LEA13(T3)
HSU-24LEA13-M
HSU-24LEA03
HSU-24HEA03
Selection of pipe
113.5 633 113.5
Floor fixing dimensions
of the outdoor unit
(Unit:mm)
HSU-32LEA13-W
AMS30H03-N(T3)
HSU-24LEA03-T
HSU-30HEA13(T3)
HSU-30HEA03(T3)
PAS30H03-N(T3)
HSU-36LEA03(T3)
For 24 30
Liquid pipe ( )
9.52mm(3/8")
Gas pipe ( )
15.88mm(5/8")
A=145mm
Indoor side
Wall hole
60mm
(Section of wall hole)
2
184.3 580
Floor fixing dimensions
of the outdoor unit
(Unit:mm)
32
B= 60mm
Outdoor side
Thickness
of wall
G
Piping hole pipe
184.3