265° F (130° C) as it adjustment, cleaning, maintenance or electrician. DO NOT force into outlet or may cause explosion. 12. Only use Shark® branded filters and troubleshooting. try to modify to fit. accessories. 24. During cleaning or routine maintenance, To reduce the risk of shock and 13.
NOTE: To remove the handle, press the release button located on the back of the unit with a thin tool while pulling up on the NOTE: The Shark® battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of handle.
FILL THE CLEAN SOLUTION TANK Unscrew the cap and add water to the tank, up to the WATER line. Next, add Shark HydroVac™ Multi-Surface Concentrate, filling to the HYDROVAC CONCENTRATE line. Replace the cap and reinsert the tank until it clicks into place.
USING YOUR 3-IN-1 CLEANER MAINTAINING YOUR 3-IN-1 CLEANER CONTROLS RINSE CYCLE The Rinse Cycle automatically cleans the system and the brushroll. Recommended after every use POWER Press and release the Power button on the handle to turn on power. To turn off power, press the button again.
Page 6
MAINTAINING YOUR 3-IN-1 CLEANER MAINTAINING YOUR 3-IN-1 CLEANER MANUALLY CLEANING THE BRUSHROLL CLEANING THE DIRTY WATER TANK You can clean the brushroll by hand as an alternative to the Rinse Cycle, and to remove debris or hair wrapped around the brushroll. 1.
Replace the filter and brushroll every 6 months. Only use Shark HydroVac™ Concentrate or water with this product. To order brushrolls, filters, and Shark HydroVac Multi-Surface Concentrate, please visit sharkclean.com or scan the QR code below. s h a r kc l e a n . c o m...
Page 8
LED GLOSSARY LED GLOSSARY SCENARIO SCENARIO VISUAL VISUAL DETAILS DETAILS UNIT IS IN USE UNIT IS IN USE Single battery icon is on. Single battery icon is on. Battery low. Note - you will not be able to run a Rinse Cycle. Solid.
Page 9
What is not covered by this warranty? What is not covered by this warranty? Normal wear and tear of wearable parts (such as Shark Cleaner, Pad, etc.), which require regular Normal wear and tear of the battery, which requires optimal temperature storage and operation to ensure maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this its proper functioning.
Page 10
NOTES REGISTER YOUR PURCHASE registeryourshark.com RECORD THIS INFORMATION TECHNICAL SPECIFICATIONS Voltage: 21.6V Model Number: ����������������������������� Date Code: ��������������������������������� Date of Purchase: ��������������������������� (Keep receipt) Store of Purchase: ��������������������������� TIP: You can find the model and serial numbers on the QR code label on the bottom of the back of the 3-in-1 Cleaner.
Need help?
Do you have a question about the HYDROVAC MESSMASTER WD260 Series and is the answer not in the manual?
Questions and answers