Kohler mira SHOWERS S43E Installation Manual
Kohler mira SHOWERS S43E Installation Manual

Kohler mira SHOWERS S43E Installation Manual

Leap side panel

Advertisement

Leap Side Panel (S43E)
These instructions must be left with the user
Installation Guide
1242345-W2-D
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the mira SHOWERS S43E and is the answer not in the manual?

Questions and answers

Summary of Contents for Kohler mira SHOWERS S43E

  • Page 1 Leap Side Panel (S43E) These instructions must be left with the user Installation Guide 1242345-W2-D...
  • Page 2: General Information

    INTRODUCTION Thank you for purchasing a quality Mira product. To enjoy the full potential of your new product, please take time to read this guide thoroughly, having done so, keep it handy for future reference. The following pages aim to provide comprehensive installation instructions, plus advice on how to care and maintain your product.
  • Page 3: Recommended Usage

    Ensure the size of door/panel is suitable for the installation. Tempered safety glass cannot be cut. Ensure nothing can impact the door or glass panels during operation. When Fitting the Enclosure The wall channels must be installed onto a tiled or waterproof finished flat and even wall surface.
  • Page 4: Pack Contents

    PACK CONTENTS X 1 q 1242345-W2-D...
  • Page 5: Installation

    INSTALLATION 10 mm ± 0 mm Note! Make sure that the walls have been tiled down to the tray. Height of Side Panel (mm) 1900 Min/Max Frame Adjustment Side Panel Size Minimum (mm) Maximum (mm) (a) Install the shower tray in accordance with the manufacturer’s instructions. Caution! Make sure that the shower tray is level and that the walls are vertical and square.
  • Page 6 ± 0 mm 6 mm 10 mm (a) Remove the wall channel from the door to be used with the side panel. (b) Position the wall channel on the wall where the side panel is to be installed. Using a spirit level make sure that it is upright. (c) Mark the position of the fixing holes, then remove the wall channel.
  • Page 7 ± 0 mm 6 mm 10 mm (a) Position the door wall channel on the wall. Using a spirit level make sure that it is upright. (b) Mark the position of the fixing holes, then remove the wall channel. (c) Drill with a 6 mm masonry bit (not supplied), and plug using the wall plugs (supplied with the door).
  • Page 8 (a) Install the side panel into the wall channel and hold in position. 1242345-W2-D...
  • Page 9 Side Panel Door (a) Install the door frame into the other wall channel. (b) Adjust the door frame so that it is in the correct position. (c) Make sure that the corner post engages correctly. 1242345-W2-D...
  • Page 10 90° ± 0 mm ± 0 mm (a) Centralise the door frame within the wall channels, making sure that the door frame is square. 1242345-W2-D...
  • Page 11 90° (a) Using the 3.0 mm hexagonal wrench (supplied), turn through 90° clockwise to lock the door frame, corner post and side panel in position. 1242345-W2-D...
  • Page 12 Note! Ensure infill strip is installed as illustrated with thicker section towards outside of enclosure. (a) Lubricate the rubber strip with washing up liquid or a suitable lubricant to help aid installation. (b) Install the rubber strip as shown above to both sides, working from top to bottom. (c) Install the infill strip.
  • Page 13 (a) Fit the plastic covers to the top of the extrusions. 1242345-W2-A...
  • Page 14 Note! Silicone should be applied vertically where the door jamb and wall channel join on the outside of the enclosure. Note! Silicone should be applied 10cm vertically up from the base on the glass/ aluminum join on the outside of the enclosure on the fixed panel.
  • Page 15: Maintenance

    Chrome Parts Use only cleansers expressly specified for chrome! KOHLER Glass Cleaner For occasional cleaning of glass treated with KOHLER Glass Protector or for more regular maintenance of untreated surfaces, we recommend using KOHLER Glass Cleaner. The cleaner cleans and polishes without smearing or streaking and rejuvenates the Glass Protector.
  • Page 16: Spare Parts

    SPARE PARTS 1781.437 Side Panel Top Cap Spare 1781.380 Locking Mechanism Spare 1781.381 Infill Spare 305818 Glass Cleaner 1242345-W2-D...
  • Page 17 NOTES 1242345-W2-D...
  • Page 18 NOTES 1242345-W2-D...
  • Page 19: Declaration Of Performance

    The performance of the products described above, are in conformity with the relevant community harmonisation legislation. This declaration of performance is issued under the sole responsibility of Kohler Mira Ltd. Signed for and on behalf of Kohler Mira Ltd. Signature:...
  • Page 20 United Kingdom and the Republic of Ireland). DAP 16.06.2013 5 013181 077124 Mira is a registered trade mark of Kohler Mira Limited. The company reserves the right to alter product specifi cations without notice. 1242345-W2-D © Kohler Co. January 2018...

Table of Contents