Advertisement
ALLEN + ROTH and logo design are
trademarks or registered trademarks of LF,
LLC. All rights reserved.
Serial Number
Purchase Date
Thank you for purchasing this ALLEN + ROTH product.
Questions, problems, missing parts?
Before returning, contact us on:
866-439-9800, 8 a.m. - 8 p.m., EST, Monday-Sunday or ascs@lowes.com.
SG24718
MIRROR IN WHITE
ATTACH YOUR RECEIPT HERE
1
ITEM #6245680
MODEL #TJ02-07M2630WH
26 IN YATES
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Allen + Roth YATES TJ02-07M2630WH
Summary of Contents for Allen + Roth YATES TJ02-07M2630WH
- Page 1 LLC. All rights reserved. ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Thank you for purchasing this ALLEN + ROTH product. Questions, problems, missing parts? Before returning, contact us on: 866-439-9800, 8 a.m. - 8 p.m., EST, Monday-Sunday or ascs@lowes.com.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Package Contents........................3 Safety Instruction......................3 Preparation.........................4 Assembly Instructions....................4 Replacement Parts List......................7... -
Page 3: Package Contents
PACKAGE CONTENTS PART DESCRIPTION QUANTITY Mirror HARDWARE CONTENTS (not shown actual size) Ø8x39 mm Ø3.5x51 mm Anchor Screw Qty. 2 Qty. 2 SAFETY INSTRUCTION Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION Follow these instructions closely, take your time, and use care while assembling this vanity. -
Page 4: Preparation
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Installation Time: 15-20 minutes. Tools Required for Assembly (not included): Phillips screwdriver, utility knife or scissors, power drill with drill bit. - Page 5 2. Pre-drill Ø8x45 mm deep holes for anchors by using a drill. Ø8x45 mm 3. Installing the anchors into the wall. Hardware Used Ø8x39 mm Anchor...
- Page 6 4. Tightening screws onto the wall. Insert the two screws (BB) into the anchors (AA). Leave a 1/4 in. space between the screws (BB) and the wall. Hardware Used Ø3.5x51 mm Screw 5. Hanging the mirror to the wall.
-
Page 7: Replacement Parts List
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday. You may also contact us at ascs@lowes.com. PART DESCRIPTION PART# Anchor AC-00839020 Screw SC-83551331 Printed in Vietnam...
Need help?
Do you have a question about the YATES TJ02-07M2630WH and is the answer not in the manual?
Questions and answers