Braun BC24 Quick Setup Manual

BC24
Alarm clock
Quick set-up guide
For detailed information refer to
the full user manual available at
www.braun-clocks.com/pages/warranty
or scan this code:
Braun helpline
Should you have a problem with your
product, please check your local service
centre at:
www.braun-clocks.com
www.braun-watches.com
Certain trademarks used under license from the
Procter & Gamble Company or its affiliates.
snooze/light
1
5
6
7
2
Battery installation
1. Remove the battery door.
2. Insert 1x AA size new battery as indicated in
the battery compartment ( ) and press the
7
RESET key ( ) to reset the clock. The display
6
will turn on after a few seconds.
3. Close the battery door.
Only use new alkaline batteries from a
reputable brand.
3
4
Setting the time
1. Touch and hold the clock icon (
enter the time setting mode.
2. Rotate the bezel ( ) to select 12 or 24 hour format.
3
3. Touch the clock icon to confirm hour format
setting.
4. Rotate the bezel to set the desired time.
5. Touch the clock icon to save the settings and
return to the normal display.
Setting the alarm
1. Touch and hold the alarm icon (
enter the alarm setting mode.
2. Rotate the bezel ( ) to set the desired alarm time.
3
3. Touch the alarm icon to save the settings and
return to the normal display.
Using the alarm and snooze function
1. Enable the alarm by pushing the ALARM ON / OFF
slider ( ) up (the green indicator is visible). The bell
5
icon will appear on the LCD display.
2. Touch one of the keys (SNOOZE/LIGHT / TIME
SETTING / ALARM SETTING / BRAUN logo) or rotate
the bezel to stop the alarm and activate the snooze
function. When the snooze function is activated, the
bell icon will flash.
3. To disable the alarm and snooze function, push the
ALARM ON / OFF slider down. The bell icon will
disappear.
) for 2 seconds to
4
) for 2 seconds to
1