Related Manuals for AUDAC WX502/OB-OW
Summary of Contents for AUDAC WX502/OB-OW
- Page 1 Outdoor Wall Speaker WX502/OB-OW AUDAC PROFESSIONAL AUDIO EQUIPMENT Outdoor Wall Speaker WX502/OB-OW User Manual & Installation Guide...
- Page 2 Warning Only use the correct amplifier output voltage and impedance. Exceeding these limits could cause fire or other failures. Avoid explosions: do not use the speaker around gasoline, thinner or other combustibles. Only install the speaker in locations that can structurally support the weight of the speaker. Not doing so may result in the speaker falling down.
- Page 3 Once the bracket is mounted on the desired location, the loudspeaker can be fixed to the bracket. Connecting the loudspeaker On the rear side of the WX502/OB-OW is a special waterproof 5-pin connector provided. This allows to connect the loudspeaker to the amplifier output. A special included connection cable should be used.
- Page 4 Additional information WX502/OB-OW Technical specifications: RMS Power 50 W Max Power 100 W Nominal Impedance 8 Ohm Line transformer power tappings 250 Ohm / 40 W 500 Ohm / 20 W 1000 Ohm / 10 W Sound pressure 1W / 1m...
Need help?
Do you have a question about the WX502/OB-OW and is the answer not in the manual?
Questions and answers