Subscribe to Our Youtube Channel
Related Manuals for AUDAC WX502
Summary of Contents for AUDAC WX502
- Page 1 Wall Speaker WX502 AUDAC PROFESSIONAL AUDIO EQUIPMENT Wall Speaker WX502 User Manual & Installation Guide...
- Page 2 Warning Only use the correct amplifier output voltage and impedance. Exceeding these limits could cause fire or other failures. Avoid explosions: do not use the speaker around gasoline, thinner or other combustibles. Only install the speaker in locations that can structurally support the weight of the speaker. Not doing so may result in the speaker falling down.
- Page 3 Mind the polarity markings when wiring the loudspeaker cables. Power settings On the rear side of the WX502 loudspeaker a recessed adjuster screw is provided. Using this adjuster screw the power / impedance of the loudspeaker can be set in 3 adjustable steps of impedance for 100V (40 Watt, 20 Watt, 10 Watt) and 1 step for 8 Ohm standard low impedance applications.
- Page 4 Additional information WX502 Technical specifications: RMS Power 50 W Max Power 100 W Nominal Impedance 8 Ohm Line transformer power tappings 250 Ohm / 40 W 500 Ohm / 20 W 1000 Ohm / 10 W Sound pressure 1W / 1m...
Need help?
Do you have a question about the WX502 and is the answer not in the manual?
Questions and answers