Related Manuals for AUDAC WS500
Summary of Contents for AUDAC WS500
-
Page 1: Installation Guide
Design Wall Loudspeaker WS500 AUDAC PROFESSIONAL AUDIO EQUIPMENT Design Wall Loudspeaker WS500 Installation Guide... -
Page 2: Installation Procedure
Installation procedure 1) Before mounting the loudspeaker, the front grill should be removed to make the mounting holes accessible. The best method for removing the front grill is to push the lower side of the front grill up with your thumbs. The grill should easily slide up, without performing large forces. - Page 3 Connections To avoid electric shocks during installation, always switch of the amplifier power when connecting loudspeakers. On the rear side of the loudspeaker three connection terminals are provided. By means of selecting the appropriate connection terminals, the desired line transformer power tapping can be set, to be used in 100V public address applications.
-
Page 4: Technical Specifications
Technical Specifications Max Power 20 Watt RMS Power 10 Watt Line Transformer Power taps 10 Watt 1000 Ohm 5 Watt 500 Ohm Line Voltage 100 V Driver impedance 8 Ohm Sensitivity 1W / 1m 92 ± 3 dB SPL Max W / 1m 102 dB Frequency response 150 Hz –...
Need help?
Do you have a question about the WS500 and is the answer not in the manual?
Questions and answers