Subscribe to Our Youtube Channel
Related Manuals for Worx Nitro WX355.1
Summary of Contents for Worx Nitro WX355.1
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 20V Cordless Brushless Compact Impact Drill WX355 WX355.X...
-
Page 3: Table Of Contents
TABLE OF CONTENT increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. 1. SAFETY INSTRUCTIONS Keep cord away from heat, oil, sharp edges 2. COMPONENT LIST or moving parts. - Page 4 explosion or risk of injury. turn it on and off. Any power tool that cannot be f) Do not expose a battery pack or tool to fire controlled with the switch is dangerous and must or excessive temperature. Exposure to fire or be repaired.
- Page 5 short-circuited by conductive materials. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, Wear ear protection screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Page 6 Metal Brick Concrete High speed Low speed Lock Remove the batttery pack Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice. 20V Cordless Brushless Compact Impact Drill WX355 WX355.X...
- Page 8 100%...
- Page 11 A1 H...
-
Page 12: Component List
2.COMPONENT LIST SUGGESTED BATTERIES AND CHARGERS CHUCK TORQUE ADJUSTMENT RING Category Model Capacity FUNCTION MODE SELECTION SWITCH 20V Battery WA3639 2.0 Ah TWO-SPEED GEAR CONTROL WA3760 0.4 A 20V Charger FORWARD/REVERSE ROTATION CONTROL WA3880 2.0 A SOFT GRIP HANDLE We recommend that you purchase your accessories from the same store that sold you the tool. -
Page 13: Intended Use
ensuring it is sharp and in good condition. CHUCK ADJUSTMENT The tightness of the grip on the handles and if any anti WARNING: Always lock off trigger switch and vibration and noise accessories are used. disconnect tool from power source when And the tool is being used as intended by its design changing accessories. -
Page 14: Problem Solution
WORKING TIMES LED light indicator (See Fig. H) Charging time problems, as above, and having Before operation, the LED light will be activated when not used a Battery Pack for a prolonged time will the On/Off switch is slightly depressed, and will reduce the Battery Pack working time. - Page 15 2011/65/EU&(EU)2015/863 2014/30/EU Standards conform to EN IEC 55014-1 EN IEC 55014-2 EN 62841-1 EN 62841-2-1 EN IEC 63000 The person authorized to compile the technical file, Name: Marcel Filz Address: Positec Germany GmbH Postfach 32 02 16, 50796 Cologne, Germany 2024/02/19 Allen Ding Deputy Chief Engineer,Testing &...
- Page 16 DECLARATION OF CONFORMITY Positec (UK & Ireland) Ltd., PO Box 6242, Newbury, RG14 9LT, UK On behalf of Positec declare that the product Description Battery-powered Drill Type WX355 WX355.X (3-designation of machinery, representative of Battery-powered Drill) Function Drilling Complies with the following regulations: Supply of Machinery (Safety) Regulations 2008 Electromagnetic Compatibility Regulations 2016 The Restriction of the Use of Certain Hazardous...
Need help?
Do you have a question about the WX355.1 and is the answer not in the manual?
Questions and answers