Subscribe to Our Youtube Channel
Related Manuals for Worx Nitro WX352.4
Summary of Contents for Worx Nitro WX352.4
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 20V Cordless Impact Drill WX352 WX352.X...
- Page 3 PRODUCT SAFETY f) If operating a power tool in a damp location is unavoidable, use a residual GENERAL POWER TOOL current device (RCD) protected supply. SAFETY WARNINGS Use of an RCD reduces the risk of electric shock. WARNING Read all safety warnings, instructions, illustrations and 3) Personal safety specifications provided with this power tool.
-
Page 4: Drill Safety Warnings
The correct power tool will do the job better c) When battery pack is not in use, keep it and safer at the rate for which it was designed. away from other metal objects, like paper b) Do not use the power tool if the switch clips, coins, keys, nails, screws or other does not turn it on and off. -
Page 5: Safety Warnings For Battery Pack
2) Safety instructions when using long drill j) After extended periods of storage, it may bits be necessary to charge and discharge a) Never operate at higher speed than the battery pack several times to obtain the maximum speed rating of the drill maximum performance. - Page 6 Concrete Do not burn High speed Li-Ion battery. This product has been marked with a symbol relating to Li-I on Low speed ‘separate collection’ for all battery packs and battery pack. It will then be recycled or dismantled in order to reduce the impact on the Li-I on RCM marking environment.
- Page 7 20V Cordless Impact Drill WX352 WX352.X...
-
Page 8: Component List
COMPONENT LIST Machine weight 1.1 kg (Bare tool) CHUCK **X=1-999, A-Z, M1-M9 there are only used for TORQUE ADJUSTMENT RING different customers, there are no safe relevant changes between these models TWO-SPEED GEAR CONTROL ***Voltage measured without workload. Initial FORWARD/REVERSE ROTATION battery voltage reaches maximum of 20 volts. - Page 9 This tool may cause hand-arm vibration syndrome if its use is not adequately managed. WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also take account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle but not actually doing the job.
- Page 10 100% 20V Cordless Impact Drill WX352 WX352.X...
- Page 11 20V Cordless Impact Drill WX352 WX352.X...
- Page 12 20V Cordless Impact Drill WX352 WX352.X...
-
Page 13: Assembly And Operation
OPERATING INSTRUCTIONS TORQUE ADJUSTMENT See Fig. F1, SCREWDRIVING, DRILLING, NOTE: Before using the tool, read the F2, F3 HAMMER DRILLING instruction book carefully. Operating the on/off switch Intended Use WARNING: Do not operate for The machine is intended for impact drilling in long periods at low speed See Fig. -
Page 14: Environmental Protection
Adjustment Ring, you can find the Torque ENVIRONMENTAL Adjustment Ring between the Chuck and the PROTECTION drill body. Position 1 is the lowest torque (screw driving force) and position 22 is the highest Waste electrical products must not be torque (screw driving force). Position is for disposed of with household waste. -
Page 15: Declaration Of Conformity
DECLARATION OF CONFORMITY Positec Germany GmbH Postfach 32 02 16, 50796 Cologne, Germany On behalf of Positec declare that the product, Description Battery-powered Drill Type WX352 WX352.X (3- designation of machinery, representative of Drill) Function Drilling Complies with the following Directives, 2006/42/EC 2011/65/EU&(EU)2015/863 2014/30/EU... - Page 16 DECLARATION OF CONFORMITY Positec (UK & Ireland) Ltd., PO Box 6242, Newbury, RG14 9LT, UK On behalf of Positec declare that the product Description Battery-powered Drill Type WX352 WX352.X (3- designation of machinery, representative of Drill) Function Drilling Complies with the following regulations: Supply of Machinery (Safety) Regulations 2008 Electromagnetic Compatibility Regulations 2016 The Restriction of the Use of Certain Hazardous...
Need help?
Do you have a question about the WX352.4 and is the answer not in the manual?
Questions and answers