Related Manuals for Worx Nitro WX102.X Series
Summary of Contents for Worx Nitro WX102.X Series
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 20V Cordless Drill Driver WX102 WX102.X...
-
Page 3: Table Of Contents
TABLE OF CONTENT f) If operating a power tool in a damp location is protected supply. Use of an RCD reduces the risk of 1. SAFETY INSTRUCTIONS electric shock. 2. COMPONENT LIST 3) Personal safety 3. TECHNICAL DATA 4. INTENDED USE 5. - Page 4 DRILL SAFETY WARNINGS misalignment or binding of moving parts, breakage 1) Safety instructions for all operations tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are Cutting accessory or fasteners contacting a “live” less likely to bind and are easier to control.
- Page 5 several times to obtain maximum performance. Do not burn Waste electrical products must not be disposed of with household waste. Please recycle where facili- A charger that ties exist. Check with your local is suitable for one type of battery pack may create a authorities or retailer for recycling advice.
- Page 6 High speed Low speed RCM marking ABN: Australian Business Number. By this number, business information such as entity type, status, business location etc. can be found at gov.au. ABN of Positec Australia Pty Limited is 14 101 682 357 20V Cordless Drill Driver...
- Page 8 100%...
-
Page 11: Component List
COMPONENT LIST SUGGESTED BATTERIES AND CHARGERS KEYLESS CHUCK TORQUE ADJUSTMENT RING Category Model Capacity WA3550 1.5Ah WA3550.1 1.5Ah FORWARD/REVERSE ROTATION CONTROL 20V Battery WA3551 2.0Ah SOFT GRIP HANDLE WA3551.1 2.0Ah BATTERY PACK * WA3553 4.0Ah BATTERY PACK RELEASE BUTTON * WA3760 0.4A ON/OFF SWITCH... -
Page 12: Intended Use
The tightness of the grip on the handles and if any anti vibration and noise accessories are used. WARNING: To prevent gear And the tool is being used as intended by its design and damage, always allow the chuck to See Fig. -
Page 13: Maintenance
DECLARATION OF 2. THE DRILL STOPS BEFORE THE SCREW IS COMPLETELY TIGHTENED. WHY? CONFORMITY body. Position 1 is the lowest torque (screw driving force) Positec Germany GmbH and position 18 is the highest torque (screw driving force). Postfach 32 02 16, 50796 Cologne, Germany Position ring to a higher position to reach the best result. - Page 14 DECLARATION OF CONFORMITY Positec (UK & Ireland) Ltd PO BOX 6242, Newbury, RG14 9LT, UK On behalf of Positec declare that the product Description Cordless Drill Driver Type representative of Cordless Drill) Function Complies with the following regulations: Electromagnetic Compatibility Regulations 2016 Substances in Electrical and Electronic Equipment Regulations Standards conform to...
- Page 16 At www.worx.com you can order spare parts or arrange the collection of a product in need of servicing or repair. Tel. Service: 0345 202 9679 E-Mail: customerservices@worxtools.com www.worx.com Copyright © 2022, Positec. All Rights Reserved. AR01520002...
Need help?
Do you have a question about the WX102.X Series and is the answer not in the manual?
Questions and answers