Panasonic EY3530 Service Manual

ORDER NO. MEW/PTD 9808-35301
Service Manual
Cordless Metal Saw Cordless Wood Saw
EY3530 • EY3531
CONTENTS
Page
• Specifications.1
• Disassembly &
Assembly Instructions — 2-6
• Schematic Diagram.7
• Wiring Connection Diagram • • 7
• Troubleshooting ..8
• Exploded View * ..9-10
• Replacement Parts List.11 -12
SPECIFICATIONS
METAL CUTTER
Motor voltage
Blade speed
Blade size Outside diameter
Mounting hole
Maximum cutting depth
Dimensions Length
Width
Height
Cutting Angle (only for EY3531)
Weight
BATTERY PACK
Storage battery
Battery voltage
Battery life
BATTERY CHARGER
Input
Weight
Charging time
STANDARD EQUIPMENT
Battery charger, Battery pack, Blade,
: 15.6V DC
: 3,100 min(RPM)
:135mm, 5-5/16"
: 20mm, 25/32"
: 3~46mm, 1/8"~1-13/16"(^ 135mm blade)
: 350mm, 13-25/32"
:198mm, 7-51/64"
:181mm, 7-1/8"
:
0
-
45
'
: 3.0kg, 6.6lbs. including battery pack
: Ni-Cd battery
: 15.6V DC (1.2VX 13 cells)
: Approx. 1,200 cycles (1 cycle = 1 charge /1 discharge)
: 120V AC
: 1.32kg, 2.9lbs.
: Approx. 15/20 Minutes
Hex wrench, Tool case
AWARNING
This service literature is designed tor experienced repair technicians only and is not designed for use by the general public. It does
not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to sen/ice a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to
service or repair the product or products dealt with in this service information by anyone else could result in serious injury or death.
©1998 Matsushita Electric Works, Ltd.
All rights reserved. Unauthorized copying
and distribution is a violation of law.