UK Tents 5 m Series Manual

PREMIUM Prime – 2,0m
5m - series
Party Tent
Please read instructions COMPLETELY before assembly. This tent MUST be securely anchored.
This tent is a temporary structure and should be disassembled at harsh weather conditions as stormy
winds, snowfall or ice.
Warnings
Prior to installation, consult with all local municipal codes regarding installation of temporary shelters.
The owner of the tent has the sole responsibility to make sure that these local rules are followed and
that the mounting is correct.
We are not responsible for damage to the unit or the contents from acts of nature.
It is always recommended that you secure your tent properly with storm straps and ground pegs
when you put up the structure. Proper Anchoring system selection is your responsibility. Heavy duty
Anchor are sold separately and are not included in this product.
Periodically check the anchors to ensure stability of shelter.
In case of extreme weather conditions, the tent cover must be removed.
Any shelter that is not anchored securely has the potential to fly away causing damage. We are not
responsible for any shelter that blows away.
This canopy is intended to protect against the effects of sun, rain, light snow, etc. It is not designed to
hold the loads that can accompany wind, rain, snow or ice storms. This structure is not tested for
specific snow, rain and wind loads.
Do not use open fire, welding equipment or other ignition sources in the tent.
Cleaning and Storage
A tight cover ensures longer life and performance. Always maintain a tight cover. Loose fabric can
accelerate deterioration of cover fabric.
Immediately remove any accumulated water, snow or ice from the roof structure.
DO NOT use bleach or harsh abrasive products to clean the fabric cover. Cover is easily cleaned with
1 /8