Table of Contents
Advertisement
Quick Links
3m - series
Professional Prime
EN
Party Tent
This high-quality tent is flame retardant and therefore can be used for public events. PVC cover
according:
EN: Please read instructions COMPLETELY before assembly. This tent MUST be securely anchored.
EN: This tent is a temporary structure and should be disassembled at harsh weather conditions as stormy
winds, snow fall or ice.
EN: Warnings
Prior to installation, consult with all local municipal codes regarding installation of temporary shelters. The
owner of the tent has the sole responsibility to make sure that these local rules are followed and that the
mounting is correct.
We are not responsible for damage to the unit or the contents from acts of nature.
- 1 -
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for UK Tents Professional Prime 3m Series
Summary of Contents for UK Tents Professional Prime 3m Series
- Page 1 3m - series Professional Prime Party Tent This high-quality tent is flame retardant and therefore can be used for public events. PVC cover according: EN: Please read instructions COMPLETELY before assembly. This tent MUST be securely anchored. EN: This tent is a temporary structure and should be disassembled at harsh weather conditions as stormy winds, snow fall or ice.
- Page 2 3m - series Professional Prime It is always recommended that you secure your tent properly with storm straps and ground pegs when you put up the structure. Proper Anchoring system selection is your responsibility. Heavy duty Anchor are sold separately and are not included in this product. Periodically check the anchors to ensure stability of shelter.
- Page 3 3m - series Professional Prime EN: Step1. Assembly is easiest if you layout all parts on the ground as shown below. 2 meter per section, e.g. 3x4m has 2 sections, 3x6m has 3 sections, 3x8m has 4 sections,3x10m has 5 sections and 3x12m has 6 sections.
- Page 4 3m - series Professional Prime EN: Step 4: Put the roof cover (28) on the frame and insert leg poles (3,4) into one side as shown below. Lift the opposite site of the frame and insert remaining leg poles to finish the tent framework. EN: Step 5: Use the leg pegs (13) to secure the legs to the ground.
- Page 5 3m - series Professional Prime EN: Step 6: Attach side panels (29) and end panels (30) to the frame and roof with bungee balls(15,16) as shown. Caution: Safety Goggles must be worn when secure the bungees. EN: Step 7: Use the thin pegs (14) to secure the side panels and end panels to the ground as show below. The guy rope (17) clasp to each corner of tent and another end of line secure to the ground by tube pegs (27).
- Page 6 3m - series Professional Prime Quantity Parts List Item Design 3x4m 3x6m 3x8m 3x10m 3x12m No.1 Pole 50x1490mm No.2 Pole 38x1920mm No.2a ground bar 38x1410mm No.3 leg pole 50x1888mm No.4 leg pole 50x1888mm No.5 pole 38x1920mm No.6 brace 1174mm No.7 brace 1652mm No.
- Page 7 3m - series Professional Prime No. 12 120° 3-way joint No.13 Leg peg 6x180mm No.14 Thin peg 4x180mm No.15 Long bungee No.16 Short bungee No.17 Guy rope 3m No.18 M8x50mm Bolt with Wing nut No.19 M8x70mm Bolt with Wing nut No.20 M6x45mm Bolt with Wing nut No.21 M6x60mm...
- Page 8 3m - series Professional Prime No.26 Clamp with bolt M6X30mm No.27 Tube peg No.28 Roof No.29 Side wall No.30 End wall - 8 -...
Need help?
Do you have a question about the Professional Prime 3m Series and is the answer not in the manual?
Questions and answers