Advertisement
6m - series
PROFESSIONAL – 2,6m
Party Tent
This high-quality tent is flame retardant and therefore can be used for public events. PVC cover
according:
Please read instructions COMPLETELY before assembly. This tent MUST be securely anchored.
This tent is a temporary structure and should be disassembled at harsh weather conditions as stormy winds,
snowfall or ice.
Warnings
Prior to installation, consult with all local municipal codes regarding installation of temporary shelters. The
owner of the tent has the sole responsibility to make sure that these local rules are followed and that the
mounting is correct.
We are not responsible for damage to the unit or the contents from acts of nature.
It is always recommended that you secure your tent properly with storm straps and ground pegs when you
put up the structure. Proper Anchoring system selection is your responsibility. Heavy duty Anchor are sold
separately and are not included in this product.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for UK Tents PROFESSIONAL Series
Summary of Contents for UK Tents PROFESSIONAL Series
- Page 1 6m - series PROFESSIONAL – 2,6m Party Tent This high-quality tent is flame retardant and therefore can be used for public events. PVC cover according: Please read instructions COMPLETELY before assembly. This tent MUST be securely anchored. This tent is a temporary structure and should be disassembled at harsh weather conditions as stormy winds, snowfall or ice.
- Page 2 6m - series PROFESSIONAL – 2,6m Periodically check the anchors to ensure stability of shelter. In case of extreme weather conditions, the tent cover must be removed. Any shelter that is not anchored securely has the potential to fly away causing damage. We are not responsible for any shelter that blows away.
- Page 3 6m - series PROFESSIONAL – 2,6m Step 2. Connect the roof poles and connectors from middle and out. Attach the reinforcement braces (parts 4 and 5) using bolts (24) and wing nuts (27).
- Page 4 6m - series PROFESSIONAL – 2,6m Step 3: Lift one side of the tent frame and attach the legs (7 and 8). Place the roof (34) onto the frame. Step 4. Attach the legs on the other side and install the feet (16, 17) at the bottom. Make sure, that the leg pipes are in vertical position, to avoid overtention on the end walls.
- Page 5 6m - series PROFESSIONAL – 2,6m Step 5. Unfold the side walls (35) and the end walls (36) and attach the side walls to the frame using the long bungees (30). Attach the end walls directly to the roof using the short bungees (31). Use the short ground pegs (21) to fasten the end walls to the ground. The guy rope(32) runs from every corner of the tent and is braced using the tube pegs (19).
- Page 6 6m - series PROFESSIONAL – 2,6m Parts List Quantity Drawing Part No. 6x10 6x12 6x14 6x16 6x18 6x20 No. 1 50x1430mm frame pole No. 2 38x1920mm frame bar No. 3 38x1920mm frame pole No. 4 25x1470mm roof brace No. 5 25x500mm roof brace No.
- Page 7 6m - series PROFESSIONAL – 2,6m No. 13 110° 4-way joint No. 14 cross 4-way joint No. 15 “T” 3 way joint No. 16 3-way joint No. 17 3-way joint No. 18 2-way joint No. 19 Tube peg No. 20 Long peg 8x300mm No.
- Page 8 6m - series PROFESSIONAL – 2,6m No. 28 M8 Wing nut No. 29 Allen Key M8 No. 30 Long bungee No. 31 Short bungee No. 32 Guy rope 5m No. 33 Hook No. 34 Roof No.35 Side wall No. 36 End wall No.
Need help?
Do you have a question about the PROFESSIONAL Series and is the answer not in the manual?
Questions and answers