Dormakaba SL30 SGL Quick Start Manual

SL30 SGL Quick Start Guide
Warranty Information
The product is covered by a 3-year manufacturers' warranty against faulty or malfunctioning parts, components, or product. A
faulty product can be returned at the customers' expense to the seller for review. At the seller's discretion, either a replacement
lock or affected part will be supplied to remedy the fault. Removing the lock cover or faceplate screws may void the warranty.
Mistreatment or ill-use of the lock may void the warranty.
Package Contents
Strike Plate
Lock
• Wiring the lock requires at least three connections; red
(positive), black (negative), and blue (control).
• Ensure the power supply has the following current available
to power the lock when supplied with the following; 400mA
for 24VDC supply and 750mA for 12VDC supply.
• Use an appropriate wire gauge for the wire run distance
between the lock and power supply.
• Do not mount the lock in the floor operating upwards or in
an environment where it can get wet
Wiring loom
4x mounting screws