Meross MSG200 - Smart Garage Door Opener Manual

Table of Contents

Contents

1 Package Contents
2 Installation Guide
3 LED and Button Rules
4 How to Use
5 FAQ
6 Safety Information
7 Documents / Resources
- 7.1 References
- 7.2 Download manual

Package Contents

* If you find any part is missing in the package, please contact https://meross.com/support/EmaiI_Support, we will provide proper solution for you.

Installation Guide

Meross smart garage door opener is the companion device of your existing garage door opener. It supports up to 3 garage doors. Its main working principle is as follows.

Download the Meross app and choose Smart Garage Door Opener to get start.
Power on the device. Wait about 5 seconds until the status LED blinks amber and green.
Set up the device.
1. Connect your smartphone or tablet to the 2.4 GHz Wi-Fi.
2. The smart device supports iOS 13/ iPadOS 13and later. In order to have better user experience, it is recommended that you upgrade your iOS or iPadOS to the latest version before pairing with the bulb.
3. Launch the Meross app, and log in to your account, or if you are a new user, tap Sign up to create a new account.
4. Tap the "+" icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish configuration.

warning Note:

As long as you finish configuration, you'll also be able to manage the device in Apple Home app.
If the QR code does not work, please try to add the smart bulb in Apple Home app.
Should you have any question, please visit https://meross.com/support#/.

Connect the sensor cable. Move the sensor to check if it is functional*

* Please contact support@meross.com for help if the sensor is not functional*.
Find a proper position on the garage door to mount the sensors*. Please make sure the distance between the two sensors is less than 1 inch when the garage door is closed, and the two sensors are well separated when the garage door is open.

*You can use the included double-sided adhesive tapes or screws for sensor fixation.
Power off your existing garage door opener. Connect the other end of the signal control cable to the two terminals that connects to the wall button. Wire order does not matter here.

Deploy the device. We recommend to deploy it on the top of your existing garage door opener and if you have three single doors, please deploy the device on the middle door opener. Use the provided double-sided adhesive tapes for the fixation if necessary.
If you have two or three single doors, additional garage door sensor kit is required for the second or third single door.
Power on both existing garage door opener and smart garage door opener. The smart garage door opener will reconnect to Homekit/Meross cloud service automatically. Congratulations! You have completed all installation steps.

LED and Button Rules

Solid amber: Initialization/ Reset/ Firmware upgrading mode.
Flashing amber and green slowly: Configuration mode.
Flashing green rapidly: Wi-Fi connecting mode.
Solid green: Successfully connected.
Solid red: No internet connection.
Flashing green 3 times: Sensors connected or disconnected (Door close or open detected).
Off: Power OFF.

How to Use

General Settings

Port 1/2/3:
Activate/lnactivate doors, and configure individual garage settings.
LED: Turn on/off LED
User manual: Check user manual.

Port Settings

Garage door name: Change garage name.
Garage door status: Activate or inactivate this garage door.
Operation history: Check operation history of this garage door.

Door notification

Open:
Send me a notification each time my garage door opens.

Close:
Send me a notification each time my garage door closes.

Overtime reminder:
Send me a notification when my garage door opens for 10-60 mins.

Overnight reminder:
Send me a notification when my garage door is still open after particular time.

Advance settings

Overtime close:
Close the door automatically when the door opens for a period of time.

Fixed time close:
Close the door automatically when the door is still open after particular time.

Opening time:
Choose the proper time duration for your garage door opener. App use it as a timeout parameter to confirm the status of your garage.

Trigger Duration:
Choose the proper trigger duration if you find your meross app can't fully close or open your garage door. The trigger duration is the same time as you press the garage wall button.

Closing alarm:
Sound alarm when door is closing.

Voice Control

Amazon Alexa:
The example commands are as followings:
-"Hi Alexa, open/close my garage."
-"Hi Alexa, lock/unlock my garage."
-"Hi Alexa, is my garage locked/closed?"

Google Assistant:
The example commands are as follows:
-"Hey Google, open/close garage door."
-"Can I have your security code?"
-"Hey google, is garage door opened/closed?"

HomeKit Siri:

The example commands are as follows:
-"Hey Siri, open/close my garage."
-"Hey Siri, is my garage locked/closed?"

Widgets

Widgets are the quick access to your Meross devices and Scenes. TO enable it, please go to Account -> Widget to add shortcuts first. And then follow below steps on your smartphones to activate them.

For iPhones:

Swipe to the right on your Home or Lock screen.
Scroll down to the bottom Of your widget list and then tap edit.
Scroll down to find Meross and add it.

For Android smartphones:

On the home screen, tap and hold on an available space.
Tap Widgets, find Meross widget and then add it.

FAQ

At Meross, we strive to assure your satisfaction. Attached below is a non-exhaustive list of questions that users are mostly concerned about.

Is Meross MSG200 compatible with my garage door opener?
Go to www.meross.com/compatibility and choose your brand/model. If your model is not listed or need accessory to make it work, please email below things to support@meross.com.
1. Your order id.
2. Learn button color of your garage door opener.
3. Your opener brand and model.
4. An address for the accessory shipment.

What if I can't control the smart device with the Meross app?
You can troubleshoot the following:
- Check if your home Wi-Fi is working properly.
- Make sure that you have disabled access control in your router and that the smart device is not blocked by the router's firmware.
- Factory reset your smart device and try to add it again.
My Home app can't add the device by scanning the QR code.
You can tap "Don't Have a Code or Can't Scan" and input the code manually.
I can't pair my device with HomeKit anyhow.
Please make sure your iOS is connecting to the 2.4GHz of your home Wi-Fi and you are having iOS 13 or later. Restart your iOS will help due to some system cache issue.

Safety Information

Keep the device away from water, fire, humidity or hot environments.
Make sure the device is fully plugged in and kept out of reach Of children for safety concern.
Do not attempt to disassemble, repair, or modify the device.
For indoor use only.
When you leave the product unused for a long time unplug the product from the power outlet.
Please contact seller for replacement if there is any damage caused by transportation.

Email: support@meross.com
Website: www.meross.com